Thats not to bad at all for a 16 year old's gun dood, not bad at all. as for price these guns are a hobby so its really about the learning and the fun. Could I recommend you stay away from nails but they are to dangerous over 40 psi quick steel and a cast mould I have found makes good consistent slu...

you just block off the chamber with a end cap that will fit backwards then you just glue your stock assembly to that to fit trigger in the stock you need to mod the blowgun by cutting the bouton off it under the triger release and I just used quicksteel to keep it in place, that part does come thoug...

thanks, like I said it drops rabits my ext one is a sawn off with a qev and the one after that is a sniper with a wooden stock and piston, and mag

sorry mate but my barrel assembly is different. My triger is put ware it can be more practical and this guy shoots 23 mm nangs out of his he has no copper in his barrel and my barrel is 12 mm and shoots .44 slugs and shoots further I looked at alot of guns before I done mine and the best method was ...

yes it is I had to mod it abit though, it came from Repco or Auto one in WA, I had cut the end off of it and put a quick release connector on it and so I could use it someware other than the car I had to make a box up with a cigy lighter port and a 240-12V 15amp power lead and switch on it it works ...

no quicksteel isnt epoxy and they do fair better than led not as heavy either

Im trying to get my hands on some qevs from them

Hi if anyone knows how I can get in contact with the owners of uksgc please msg me the addy,
Thanks

I have found that quicksteel works better than led for slugs it comes out 1/3 of the weight but does just as much damage. jus remember to use crc or wd40 in the mould before you put the quicksteel through it to stop stick.

Shut up.
NO you shut up,
NO YOUU shut up,
No you shut up..
Fininshed yet?
Yes I think so.

ah inside is a 15-20 copper reducer reversed so to but up nice but I really dont know what it is it extends in the middle so it might be like hobbo said and a repair cupling

ah the breach is all good it does back 20 to a 15 reducer inside the back of the barel so it fits up nice and snug so none of the power is lost I will have to cut the other one up but I will post a pic of the setup for it it works really good. the polly acts as a seal for the reducer in the back of ...

na it doesn't hamper the power at all

Barrel length: 85cm Barrel Diam:outer:20mmpvc polli :inner:12mm copper Chamber Vol:16inchx50mm Chamber Diam:50mm PSI:100-150 Distance:100meters -150 Ammo: Spud Wax Slug Wax sabo metal head. <a href="http://s430.photobucket.com/albums/qq29/crashrun/?action=view¤t=DSC00018.jpg" target="_blank"><...