thank you I think I have it if i replace the wheel with the shoe of the trigger as you pull back on the shoe the lever will pivot upwards working the valve button. correct i hope

nice concept for the gun. if you wanted to make a few alterations to positioning, it could be more gun like and allow for a better trigger with the 3/2 valve. 1 the 90 elbow between the QEV and 3/2 should be straight 2 the 3/2 should have the button down, a trigger can now be added with a pivot poi...

Thanks JSR. I have this topic bookmarked already, forgot all about it!!!!!!!

Sorry for being so lazzzy

Can I use this valve as a trigger in conjunction with a QE valve and air chamber?


Link for valve purchase http://www.uxcell.com/search.php?catego ... ctSearch=1

http://brewerschoice.com.au/shop/co2-ta ... m-adapter/
Then read the first post. You can get a regulator from uxcell.com with the type 30 thread also called din 477

Hi Datsun I refill up to 700 psi from my fridge compressor, apart from that Woolworths do exchange bottles of C02 but make sure you use the bottle in a vertical position or at a 33 degree angle from the horizontal so you only get Co2 gas and not liquid. (not required if you use hpa)

Thanks JSR

http://www.spudfiles.com/forums/sodastr ... 22079.html

Can someone explain to me how this works?

I tried to contact the author but no luck.

What is the reason for using a tyre inflater instead of just a air blower.

Zeus, thanks for the invite I will take you up on that. You are right about the No of shots. Using 700 psi and regged to 90 psi I got 7. I also halved the chamber size to 50mm but that is not enough air to even push the bb half way down the barrel. JSR, Yes I agree with you on the quick connect weig...

dajoro- I have measured the barrel which is sold as 8mm i.d. and it comes in at 7.62mm. The bb's that I bought from China come in at 7.59mm. Thats as close as I can get to fitting, if I put a small piece 1/8" wide by 1/4" long of insulation tape on the bb then it wont fit down the bore without pushi...

Thanks Zeus, Just what I am looking for, good, honest, criticism.

cheers

edit* It is illegal in Australia to own or use paintball, airsoft, air rifles, or ammo for these weapons unless you hold a valid firearms licence.

thanks skiddymunkie I can regulate the pressure via the bottle valve but I am waiting for a regulator to arrive.

thanks for your interest.

Is this concept feasible?

Air pressure in bottle 700 psi via fridge compressor.

chamber size 100 mm x 13 mm.

Bore 8 mm

barrel 600 mm

Ammo 7.5 mm BB

quick connect bottle to chamber, screw on barrel, ready to shoot.

I have a 600mm barrel with an id of 8mm which works out to 30171 cubic millimetres. Firing chamber is 100mm id of 12mm = 15085 cubic millimetres. This is approx .5:1 (if my figures are right ) :?: Would someone please check these figures for me. Firing 7.5mm bb's @ 150 psi bolt action single shot. a...

point taken sorry!!!