Before I start I would like to give credit for the idea and inspiration for this to biged http://www.spudfiles.com/forums/m1a1-bazooka-t15933.html. I will be very happy with myself if my combustion version of his gun is near its level. Anyways this will be my first build of spudfiles that I actually...

sweet jesus! this is the real deal

sorry for reviving a semi-dead thread, but what size and length pipe is your chamber and where did you buy it? also just to make sure is this basically a coaxial gun that doesnt have the barrel go inside of the pipe and the piston doesnt seal against the barrel

thanks everyone for answering! i plan to order a 1/4" rectangular qev off of ebay this weekend tatfree you should just search "quick exhaust valve" on google shopping, amazon, or ebay, if you don't want to pay for shipping then you can just simply make your own oops and i almost forgot... i have sea...

I am making a break barrel QEV pistol in which the QEV will be housed inside a piece of 1&1/4" PVC to make it look more aesthetically pleasing. the PVC will also be used to have 2 sets of rails( 1 for lazer and 1 for a red dot ) and a pistol grip frame screwed into it. i am trying to decide weather ...

i have decided on making a heat molded pvc grip for the handle i plan on making it much like the one that i put the link on... my oven is heating up to 400 right now, i plan on just bending about a foot long piece of 1" pvc at about a 60 degree angle then squeezing it while still hot to make the fin...

oops ill remove that

how long would you guys suggest that the chamber be?

i was also contemplating putting a little mini reg on it and finding an adapter and pipe that fits around a 12 gram co2 cartage tightly so that i could get multiple shots... what do you think?

Don't say that! A spudgunner never gives in to anything! You could make a trigger out of some wire or some scrap metal. All you'd need is pliers or a dremel... It's not as hard as you'd think... well my dad has a ton of tools its just a matter of talking him into letting me use them ( and most of t...

just make a custon one that pushes the pin in on the scrader, you can just make one outa metal or wood. whatever you wanna do though. thats a great idea although it sounds pretty difficult since i do not own very many tools to do that kind of job ( being 15 years old ) I was thinking though, if i u...

ok this is a terrible question but i cant figure it out... how do i add a picture to a post? i have plans i would like to share

and maverick i would like to have an actual trigger so i could shoot it more accurately

the TTP ( Tactical Target Pistol ) will be a 1/4" piston valve or qev pistol. I have spent most of my spring break thinking about it, drawing up its schematics, and researching parts I will order. I am having some trouble making the 1/4" piston though, have many people done that before and do you ha...

eeeh i'd rather use real fittings so that i can take it up to higher pressures without any worries.
and im going for aesthetics

ok well i recently went to the store and got these galvanized pieces 12"x3/4" pipe nipple for my chamber 3/4" to 1/2" bell reducer for attaching the barrel with a 1/2" filed out male adapter a 3/4" coupler and a 3/4" to 1/4" hex bushing to attach to my 1/4" tee with a blowgun and ball valve quick co...

thank you so much. I can finally begin my sniper

thats what i'm wondering. you say " a proper reducer" but what do you use for your proper reducer to connect the barrel? is it just a nipple that you have the barrel epoxied into or is their another way?

what do people use for attaching a coaxial barrel to the end of their chamber? pics would be appriciated