I've seen a pneumatic ram operated ballvalve on a cannon that opened in 90ms . So I kinda doubt the ability of a human to fully open a ballvalve only 10ms slower. -check the valve opening video clips on that one. Thanks for the tip....im going to look into that ram. Also the gun is heavy, I put the...

Yes...im thinking a longer 2 inch barrel, but water bottles fit right in a 2 1/2. I love it.

I am eventually going to spring load it. When the ball valve is turned fast enough.....the gun makes a nice VERY LOUD pop and no air hissing out after the projectile has left. Im having a hard time believing a piston valve could do much better, as there are NO headaches with the ball valve, I have m...

80 inches of 4inch tank a 72inch 2 1/2 inch barrel and a 2 inch ball valve. The valve works like a charm! It sounds like a shotgun going off and the recoil with just a tennis ball at 60 psi about broke my knee. The ball went over 900 ft with just 60 psi. Im going to take it to a 100 psi with a bottl...

The cannon is done, im posting pictures right now in the showcase.

Ok someone please chime in....I have a 10ft section of 4 inch and aprox 6 ft of 2 1/2 inch pipe what size do I make the barrel and tank or tanks?

Right now its a little hard to open, I will work on that. I really want to make another 2 1/2 barrel cannon . My first is 2 1/2....seems like lots of stuff fits that barrel. So if I make a 2 1/2 barrel how long? I was planning 4 inch tank(s) Here is the picture of it next to a one inch valve, A larg...

I have a free brass 2 inch ball valve,threaded in both ends, is it worth messing with? It is quite the monster compared to a one inch.

Very Nice!

How about a burst disk in front of a supah? Open the supah, then the burst disk -busrt. A little more safe, easy to aim.

Here is some info I have found. I know from past That after it is re-melted it gets brittle. The info that I am listing is for pvc I not pvc II. And there is some good info here also http://www.pvcinformation.org/ Flash Ignition Temp 730°F Burning Rate (in/min) Self Extinguishing Softening Starts, (...

Because of the annoying insults and the bad advice, I have decided to quit this forum. I would like to suggest that in the future, a-holes are in some way reprimended. However, any incendary replies to this will not be seen by me. I have felt the same way this guy does, just by reading some crap th...

I like those cars! Here is my idea of fun, my 72 Chevelle blown big block!!!

<a href="http://pg.photos.yahoo.com/ph/dvdorner/ ... otos">Long Link</a>

Most newer mini guns do not have firing pins, they are fired using electricity. The firing pins cannot be cocked and dropped fast enough to keep up with the rotating speed.