Search found 28 matches

by DVLCHLD
Mon Feb 18, 2008 10:13 pm
Forum: Pneumatic Cannons
Topic: Opinions on 12v compressors
Replies: 32
Views: 8380

For pressurizing pneumatic devives I recommend a CO2 tank with a remote line and a home made fillstation with a regulator and a quick disconnect fill nipple to connect the remote line to. You'll have all the air you need at 850 psi and it will pressurize as fast as you want it to.
by DVLCHLD
Sun Feb 17, 2008 2:33 pm
Forum: Pneumatic Cannons
Topic: Another Sprinkler Valve Problem
Replies: 19
Views: 5084

Your air chamber is designed OK and it's plenty big enough. How much air pressure are you puting into it? Also, there's a small drain hole in the exit port of the sprinkler valve. It should be right there inside the 3/4" threaded hole. Be sure that hole is plugged up with epoxy. Just a thought. Also...
by DVLCHLD
Sun Feb 17, 2008 12:55 am
Forum: Pneumatic Cannons
Topic: Sprinkler Valve?
Replies: 13
Views: 3217

What??lol. Are you kidding?? A HPA tank or CO2 tank used for paintball would be much more practical.
by DVLCHLD
Sat Feb 16, 2008 2:52 pm
Forum: Pneumatic Cannons
Topic: Sprinkler Valve?
Replies: 13
Views: 3217

No. The regulator would allow the air from the CO2 tank to slowly fill the air chamber to the desired pressure. Once the air pressure above and below the diaphram in the sprinkler valve equalized at the desired pressure the regulator would shut off the air flow from the CO2 tank. The gun would then ...
by DVLCHLD
Fri Feb 15, 2008 10:30 pm
Forum: Pneumatic Cannons
Topic: Sprinkler Valve?
Replies: 13
Views: 3217

semi-auto

I would use a modded sprinkler valve with a blow nozzle mounted straight into the cap on the sprinkler valve. I would also mount a regulator on it so you could us a CO2 tank in a belt pouch and a remote line. Then you can just fire, wait a few seconds for it to pressurize, then fire again. Then all ...
by DVLCHLD
Fri Feb 15, 2008 10:24 pm
Forum: Pneumatic Cannons
Topic: Another Sprinkler Valve Problem
Replies: 19
Views: 5084

valve problem

The inside diameter of the path that the air has to go through must be the same or larger than the input port on the sprinkler valve. So, since you're using a 3/4" sprinkler valve everything between the valve and the air resevoir must be at least 3/4" so that it doesn't restrict the air flow.
by DVLCHLD
Tue Feb 12, 2008 7:20 pm
Forum: Pneumatic Cannons
Topic: Pneumatic mine
Replies: 8
Views: 2117

mine

Go to the pneumatic cannon showcase and look on page 11 at the topic "anti-personel mine". Sorry I couldn't link it.
by DVLCHLD
Sun Feb 03, 2008 4:40 pm
Forum: Pneumatic Cannons
Topic: Piston Valves Explained Visually
Replies: 178
Views: 302024

Sweet. Now I finally know how a piston valve works. It's kind of like how a sprinkler valve works but on a grander scale with the piston taking the place of the diaphram. Thanks for those animated graphs.
by DVLCHLD
Fri Feb 01, 2008 12:09 am
Forum: Pneumatic Cannons
Topic: Sprinkler Valve
Replies: 15
Views: 3732

The hole the flow control screw is in needs to be sealed up with epoxy. There should be another small hole inside the large exit port of the sprinkler valve and it needs to be sealed up too. Sprinkler valves work fine with or without a guide rod. I have an Orbits WaterMaster sprinkler valve and it w...
by DVLCHLD
Thu Jan 24, 2008 7:02 pm
Forum: Pneumatic Cannons
Topic: Tilt valve ??
Replies: 5
Views: 1880

tilt valve

I tried the tilt valve today. It doesn't let enough air out fast enough to allow the sprinkler valve to open. So scratch that idea. lol.
by DVLCHLD
Wed Jan 23, 2008 8:00 pm
Forum: Pneumatic Cannons
Topic: Orbits valve mod
Replies: 27
Views: 5664

pics

I'm making a smaller air chamber for the land mine. I want it a little as possible. Once I get it done I'll try to post some pics.
by DVLCHLD
Tue Jan 22, 2008 8:50 pm
Forum: Pneumatic Cannons
Topic: Tilt valve ??
Replies: 5
Views: 1880

tilt valve

Yea, the rubber cover has aready been removed and it does have the metal rod sticking up out of it. I know a sprinkler valve can be activated by a small air drain but when you're using a very small tank and a very short barrel the diaphram in the sprinkler valve has to open as fast as possible. If t...
by DVLCHLD
Mon Jan 21, 2008 11:34 pm
Forum: Pneumatic Cannons
Topic: Tilt valve ??
Replies: 5
Views: 1880

I can't find any specs. If you google tilt-valve you can see alot of them. A friend of mine suggested them. He has a few he's going to let me test. I'm talking about just the rubber tip. I'll let you know what I find out. There's alot of cool valves on some of those balloon web-sites. They have a pu...
by DVLCHLD
Mon Jan 21, 2008 8:15 pm
Forum: Pneumatic Cannons
Topic: Tilt valve ??
Replies: 5
Views: 1880

Tilt valve ??

Say you have a sprinkler valve that you want to mod for pneumatic operation. Istead of using a 1/4" ball valve or a blow nozzle, could you use a tilt-valve instead? I guess I'm asking if a tilt-valve would let enough air out to allow the diaphram in the sprinkler valve to open. has anyone ever used ...
by DVLCHLD
Mon Jan 21, 2008 7:51 pm
Forum: Pneumatic Cannons
Topic: Orbits valve mod
Replies: 27
Views: 5664

I couldn't find a pop-off valve with a pull ring like you were talking about. I made a spring loaded mechanism instead. I'm going to keep looking for a small pop-off valve with a pull ring though.