Pressure Regulator 100-140Psi

[pyromane93]

Hey Guy's
I'm searching for an Pressure Regulator witch can regulate the Pressure from 2900psi (200bar) to 100-140Psi and fits on a Paintball Bottle
Does anyone knows where i can Buy one?

I have a Paintball HP Air-bottle with 2900Psi and i will regulate it to 120psi for using on my homemade semi auto Qev Gun

thanks
greez pyromane93

[killerbanjo]

Assuming your paintball bottle already has a reg (from 3k psi to 800psi) then this is a good cheap reg for you and you can still use the bottle for paintball without emptying it and changiing the reg.

http://www.ebay.co.uk/itm/170691170358? ... 1438.l2649


If you dont want an ASA output then look at somthing like this

http://www.ebay.co.uk/itm/270720473558? ... 1438.l2649

[pyromane93]

Ok the first one looks very cool.. but do you know how accurate is it?
I hope the connections fits to my air tank

thanks man
greez

[killerbanjo]

Do you mean how accurate the guage is? It wont be the best due to the size, but with some adaptors you could replace it with a bigger more expensive one that should give you great accuracy

[-X3-]

Hello Pyromane, I'm assuming you're french but answer you in english...
If your paintball bottle is air type, then the inline regulator that is connected on the output could be modified...I've opened mine and replace half of the Belleville washers by a strong spring (from an extinguisher). Afeter a bit of trying, the pressure is now regulated at about 200psi. It depends on how strong your spring is and how many washers you use.
A simple, effective and cheap way to regulate air from a paintball air bottle
PS : the $20 regulator from ebay seems to be crappy, Petitlu from Patator forum bought it and it failed after a few uses.

[anarchy08]

http://www.ebay.co.uk/itm/NEW-PAINTBALL ... 380wt_1024

highly reccomend this, its what im using on my 6mm semi auto, has not failed and gives me a constant pressure of my choice up to 350 psi, it is a pressure regulator not a flow regulator which is what you want.
goodluck, anarchy_08

[jackssmirkingrevenge]

highly reccomendthis, its what im using on my 6mm semi auto, has not failed and gives me a constant pressure of my choice up to 350 psi, it is a pressure regulator not a flow regulator which is what you want.

My experience with that regulator was quite a negative one, I got it to behave sometimes but on other occasions it let the full pressure out and destroyed a rather nice pressure gauge along with its own