Are these basically the same as diablo pellets?

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Fri Dec 27, 2013 6:54 pm

Hey guys, I'm making a high pressure copper coax that will shoot .22 pellets. For a barrel, I am planning on 1/4" OD K&S brass tubing with a .014" wall, which makes the ID .222". This would of course be a smoothbore, and I have read that diablo shaped pellets perform well without rifling. Legit diablo pellets are a bit more expensive though, so I was wondering if a pellet like the following is basically the same as a diablo:

http://www.amazon.com/Crosman-Domed-Pre ... ellets+.22

These crosman pellets appear to have a similar shape but I'm not entirely sure. I want this gun to be as accurate as possible! Thanks guys
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sat Dec 28, 2013 3:23 am

The skirt is too shallow, they will tumble. Modern airgun pellet designs assume rifled barrels.

Why don't you just buy a spare Crosman barrel?

http://www.dlairgun.com/Accessories/Cro ... arrel.html

Seriously just $25. You're an American f'r chrissakes!
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sat Dec 28, 2013 6:22 pm

jackssmirkingrevenge wrote:Why don't you just buy a spare Crosman barrel?

http://www.dlairgun.com/Accessories/Cro ... arrel.html

Seriously just $25. You're an American f'r chrissakes!

X2....Jack, you did know that D&L is Canadian??

Being an 'merican, gunfreak can order direct from Crosman...for even less.

http://www.crosman.com/cs/contact
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Sat Dec 28, 2013 11:25 pm

I don't think the breech on a crossman barrel would allow for use in a coaxial... I could be wrong though. I have already made my barrel assembly and the epoxy is curing. So basically any pellet that isn't "diablo" will tumble?
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sun Dec 29, 2013 12:54 am

No hard and fast "rule" that says you cannot add the barrel after the valve...treat the co-ax itself as a sort of toolies valve with extra dead space behind projectile. Wouldn't be the first time that such a compromise was made to achieve a desired configuration.

Sort of a moot point if the epoxy is already curing though. :wink:

Pretty much most airgun pellets are "diabolo" in shape....the heavier ones tend to be less biased with respect to mass forward...would stick to the "standard" weight types (7.9gr in .177 and 14.3gr in .22), which coincidentally...are the most commonly stocked ones.

http://www.pyramydair.com/blog/2005/12/ ... sizes.html
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sun Dec 29, 2013 4:09 am

Gippeto wrote:Jack, you did know that D&L is Canadian??
Very much :)
I don't think the breech on a crossman barrel would allow for use in a coaxial...
You have a hacksaw and a sort-of lathe to smooth it off, what's the problem ;)

You're looking for medium weight pellets as Gippeto said, with a deep hollow in the skirt.

JSB exacts have this sort of shape:

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Sun Dec 29, 2013 1:40 pm

Thanks for the pointers. I found some .22 round lead balls online and went ahead and ordered them. They should give me decent accuracy, but I'm still curious about pellets. I think I'll just try the crosman dome heads. If they aren't very accurat it's not a huge loss because they can always be used for shorter range shots. I found some heavy diabolos that might work well too... There is this sampler tin with different pellet shapes that would help me determine the best pellet shape. Might get that eventually. One more day to initial testing! Gotta wait a few more days for my bbs to arrive though.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Tue Dec 31, 2013 7:07 am

I still think you should go for a rifled barrel, they are cheap and available!
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Wed Jan 01, 2014 1:27 am

If this setup doesn't work well, I will definitely consider using a proper barrel. I didn't think to use a rifled barrel for this project until you guys suggested it, and they really are pretty cheap. Definitely an option if I can't get this gun to shoot accurately.

Initial testing was a disaster. The epoxy that sealed the barrel and chamber dripped down the inside of the chamber because I didn't seal it well enough, so about 3mm of epoxy accumulated on the face of the piston. Just a disaster. I didn't even mix it right so it didn't cure hard. I ripped it all apart, salvaging everything, miraculously. Cleaned it all up and re-epoxy'd it all up. Did it right this time, so tomorrow morning I find out if this thing will even shoot. My bbs will arrive in a few days so we can see how accurate it is.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Jan 01, 2014 6:52 pm

Gun Freak wrote:The epoxy that sealed the barrel and chamber dripped down the inside of the chamber because I didn't seal it well enough, so about 3mm of epoxy accumulated on the face of the piston. Just a disaster. I didn't even mix it right so it didn't cure hard.
Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Wed Jan 01, 2014 8:58 pm

You mean to tell me that you, the master of epoxy, have made a mixing mistake?? I'm in shock!!
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Thu Jan 02, 2014 3:17 am

I had my early days too, I also remember coming back from school excited to try out a new project only to find it had been fused solid by an unexpected leak. We're talking 15 years ago, but you don't forget these things man...

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Thu Jan 02, 2014 11:08 am

You learn from your mistakes I guess haha. I will never cast epoxy without sealing the mould ever again :P
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Fri Jan 03, 2014 1:35 am

Gun Freak wrote:I will never cast epoxy without sealing the mould ever again :P
Words are just that my friend ;)
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply