I was wondering, would melting down a huge candle in to many small barrel sized slugs work at all, or just desintergrate as soon as they left the barrel? Thanks,
Mav
Wax slugs
- saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
make a mold with a pipe and a cap
it will make a mess though
it will make a mess though
"whoa... I thought pimpmann was black..."-pyromanic13
I made some candle slugs and they worked quite well. I shot tem from a 1" barrel. I put chunks of lead in some of them and some small bolts were threaded in while the wax still soft. When I shot t hem at a piece of plywood the wax would flatten out and bounce off but the slug would go through.I made them using pvc couplings as a mold.
- boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
Wax is harder than rotten potatoes. I have launched rotten potatoes. The potatoes survived: wax will survive launch.
And taterjim - don't you mean PVC <i>nipples</i>? Couplers would form a slug significantly bigger than the barrel.
As to melting down candles, it'd most likely be cheaper to buy strait up parrafin. I don't know exactly where you'd find it... see if you can find the canning section of your store. If you can't find it, just ask an employee.
And taterjim - don't you mean PVC <i>nipples</i>? Couplers would form a slug significantly bigger than the barrel.
As to melting down candles, it'd most likely be cheaper to buy strait up parrafin. I don't know exactly where you'd find it... see if you can find the canning section of your store. If you can't find it, just ask an employee.
- Infernal Maveric
- Specialist 2
- Posts: 220
- Joined: Sat Oct 08, 2005 3:41 pm
Ok thanks guys. I found about 10 small candles in my house the exact size of my barrel. I must first build my cannon, but as its rainy and wet, i dont realy want to be in my shed for too long. But ill tell you how it goes. Thanks all!
- ƒlying$pud
- Private 2
- Posts: 36
- Joined: Tue Oct 04, 2005 2:48 am
wouldn't the candle grip to much in the barrel?
- Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
It should'nt, I mean, it would fit tight and to the barrell, but it should'nt be held back at all.
In answer to your question , I used a 3/4 " coupler to make ammo for a 1" barrel.. the coupler fits the OD and is larger than 3/4". It worked really well. I could put a piece of wax between 2 couplers and literally just twist it as I pshed them together.and it would shape the wax.