Finding .177" pipe

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Wed Jun 03, 2009 1:49 pm

Ok, I just found out I can buy 6000 .177" steel bbs at a local store for about $16 USD. I have plans for a single action rifle that shoots .177" bbs. Does anyone have any idea where I can find .177 INNER DIAMETER pipe. I have googled it and looked on McMaster Carr, but couldn't find anything. Also, please don't just say "go buy a commercial .177" gun and take out the barrel and use that". If I bought an air rifle I would use it, not take it apart (unless it was broken). Thanks Yall!
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
jeepkahn
Corporal 3
Corporal 3
Posts: 747
Joined: Fri Jan 09, 2009 1:11 pm
Location: Triad, NC, USA

Wed Jun 03, 2009 1:58 pm

I'm willing to bet that the barrel is not actually .177 if you mic'd it... and it's also refered to as 4.5mm, so you just need to start looking for metric pipe/tube, 4.5mm ID...
User avatar
rp181
Sergeant
Sergeant
Posts: 1090
Joined: Thu Dec 13, 2007 8:47 pm
Contact:

Wed Jun 03, 2009 2:00 pm

BB's are not manufactured to precise standards, you need a slightly larger barrel, such as
http://www.mcmaster.com/#9056k612/=25q91o
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Wed Jun 03, 2009 2:00 pm

ok. thanks, I will look for that
ok, so even with the slight size variation, they won't get over .18"?
EDIT: but 4.5 mm is about .183"...so do you think .180 pipe would be big enough?
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
john bunsenburner
Sergeant 5
Sergeant 5
Posts: 1446
Joined: Sun Oct 19, 2008 5:13 am

Wed Jun 03, 2009 2:21 pm

yes .18" would be great. And you could, if this is serious, buy .177 barrels, they have prices between 50and 100$but are great quality, a thing to consider perhaps?
"Did you ever stop to think that out of the seven deadly sins envy is the only one which doesn't give the sinner even momentary pleasure"-George Will
User avatar
daberno123
Corporal
Corporal
Posts: 594
Joined: Mon Nov 19, 2007 5:56 pm
Location: Ohio

Wed Jun 03, 2009 6:12 pm

I have the tubing rp181 linked to and its a great fit. So tight that pellets have trouble fitting and bb's take a while to roll down.

I'd suggested getting something to sleeve the tubing in, because the walls are thin and the barrel will be bent by the recoil. I'm still looking for something suitable; soon I'll order a length of 1/8" pipe and try that out.

Also 4.5 mm equals 0.17716535 inches, not sure where you got .183" from.
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

Wed Jun 03, 2009 9:29 pm

you buy a cheap bb gun and gut it.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote

you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
User avatar
MountainousDew
Specialist 2
Specialist 2
Posts: 230
Joined: Tue Apr 14, 2009 6:06 pm

Wed Jun 03, 2009 9:37 pm

hi wrote:you buy a cheap bb gun and gut it.
While many people would do that, like myself... He said that if he would buy a BB gun, he would just use that.
Maybe someone should just hit him over the head and hand him a bb gun barrel when he wakes up.
<a href="http://s709.photobucket.com/albums/ww95 ... =MDSig.jpg" target="_blank"><img src="http://i709.photobucket.com/albums/ww95 ... /MDSig.jpg" border="0" alt="Photobucket"></a>
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Wed Jun 03, 2009 9:49 pm

1/4" brakeline from the auto parts store of your choice. (NAPA)

.177 pellets fit near perfectly, it'll handle several thousand psi, and the best for last....

ITS CHEAP. :D
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Wed Jun 03, 2009 11:32 pm

I think I'll go with the .18" pipe and sleeve it in 1/4" brakeline. Thanks yall!
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Jun 03, 2009 11:59 pm

maverik94 wrote: 4.5 mm is about .183"
No, it's actually 0.177165", and steel BBs are usually made a bit smaller (4.4mm - 0.17322") to compensate for BB guns with rifled barrels that can also take lead pellets.

Barrel tightness is important for power, have a look ;)

I use copper tubing with a true 4.5mm diameter, it comes coiled so there's the problem of straightening it out but otherwise it's perfect.
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Thu Jun 04, 2009 11:52 am

yeah, but I think i'll go with what I said above, daberno123 says it works great...so...
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
covey12
Specialist 2
Specialist 2
Posts: 260
Joined: Sat Aug 23, 2008 4:36 pm

Tue Jun 09, 2009 9:00 am

two options for the best fit, one buy a cheap bb gun, for 20 dollars and scrap the barrel

two: go to your local hobby shop, the will most likely have a lot of small diameter pipes that are made out of brass. this is how i got my .177 pellet barrle, i epoxied it into a piece of 1/2inch pvc to get it to go into the valve.
“The object of war is not to die for your country but to make the other bastard die for his.”
mrphilaustin
Recruit
Recruit
Posts: 1
Joined: Fri Apr 10, 2015 10:37 am

Fri Apr 10, 2015 11:01 am

I made a .177call rifle it is still a work in progress "of course"
But I used a barrel from a crossman pump single shot I had that was broken.

[youtube][/youtube]
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Fri Apr 10, 2015 1:01 pm

Your video is set to private.
Post Reply