Hey all Im looking for some ideas for building construction materials for larger model airplanes that i hope to put a Valveless rocket on. Materials such as Balsa wood are already known so please dont mention that. Im looking for anything you can buy to anything you can make.
Send me some idearz!
Light weight construction materials
lots of my airplanes use ply wood. its not that heavy and works quite well.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
-
- Specialist
- Posts: 112
- Joined: Sun Sep 17, 2006 12:48 am
If you can afford it, try carbon fiber. You could also try foam. Take a look at remember www.RCGroups.com lots of neat RC stuff.
Last edited by COD_FILLETS on Sat Jun 02, 2007 7:28 pm, edited 2 times in total.
"If at first you don't succeed... So much for skydiving." - Henry Youngman
"Better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
"I'll Procrastinate Later" - COD_FILLETS
From [url]Quotes4All.net[url]
"Better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
"I'll Procrastinate Later" - COD_FILLETS
From [url]Quotes4All.net[url]
- Pete Zaria
- Corporal 5
- Posts: 954
- Joined: Fri Mar 31, 2006 6:04 pm
- Location: Near Seattle, WA
Fiberglass is strong, lightweight, and reasonably easy to work with.
I'd imagine you could mold the entire thing out of bondo if you really wanted to...
You should find an R/C forum for this question. They'd be able to help you out more there.
Peace,
Pete Zaria.
I'd imagine you could mold the entire thing out of bondo if you really wanted to...
You should find an R/C forum for this question. They'd be able to help you out more there.
Peace,
Pete Zaria.
a bondo airplane, however cool it may be, would never get off the ground.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
- Pete Zaria
- Corporal 5
- Posts: 954
- Joined: Fri Mar 31, 2006 6:04 pm
- Location: Near Seattle, WA
I wouldn't recommend attempting to make the entire plane from bondo, but individual parts (cowlings, engine covers, body panels, etc...) should be fine. Bondo is not strong enough to be used for structural joints or wings, of course. I'm just saying, it could probably be done. Fiberglass or balsa are better choices.hi wrote:a bondo airplane, however cool it may be, would never get off the ground.
I'm curious about this "valveless rocket". What do you have in mind?
Peace,
Pete Zaria.
- crazyfreak0075
- Specialist
- Posts: 159
- Joined: Thu Aug 17, 2006 4:09 pm
Tell you the truth i need to get a arc welder first to make it.
I hope to just integrate a valveless rocket or two, (depending on the trust calculations) into the plane. I'm hoping to make it R/C too. I'm thinking this might be a stretch even for me but I have people that can assist me too.
Any who, as far as fiberglass goes, how exactly do you buy this. Can you just buy the resin. Then make your mold???
I hope to just integrate a valveless rocket or two, (depending on the trust calculations) into the plane. I'm hoping to make it R/C too. I'm thinking this might be a stretch even for me but I have people that can assist me too.
Any who, as far as fiberglass goes, how exactly do you buy this. Can you just buy the resin. Then make your mold???
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
carve the shape out of foam, hollow it out leaving as thin a wall as you can then pull nylon stockings over it and paint with fibreglass resin
hectmarr wrote:You have to make many weapons, because this field is long and short life
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
Do you mean a valveless pulse jet?
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done