Fair comment, how about a "used" burst disk then? Not at all confusting (because you can only use it once) and not offensive to the linguistic fasciststhey are called burst disks before they have burst
MBDC - 500 psi handheld burst disk gun
-
jackssmirkingrevenge
- Five Star General
- Posts: 26216
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 576 times
- Been thanked: 347 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
JSR, I agree, used is the right way of describing it.
Nice simple, but effective design there, shows what some pressure and a fast valve combo can do.
Although I think you're a bit modest when you say "semi decent power" - I'd still need to add almost half as much pressure again over what I'm already using (30 bar total), and finish the valve mods I'm doing to get that same power level with those slug weights - but I would be achieving it with a barrel just under a foot shorter (but with very fractionally higher bore).
I'm actually planning on using that pressure anyway sometime in the future... won't that be fun?
How easy is aiming the thing?
Nice simple, but effective design there, shows what some pressure and a fast valve combo can do.
Although I think you're a bit modest when you say "semi decent power" - I'd still need to add almost half as much pressure again over what I'm already using (30 bar total), and finish the valve mods I'm doing to get that same power level with those slug weights - but I would be achieving it with a barrel just under a foot shorter (but with very fractionally higher bore).
I'm actually planning on using that pressure anyway sometime in the future... won't that be fun?
How easy is aiming the thing?
Does that thing kinda look like a big cat to you?
I vote for the terminology "bust disk" 
-
mark.f
- Sergeant Major 4
- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
- Contact:
I say the used burst disk should simply be called "chaff", (if it's an Al foil disk), or otherwise the "vacuum frier", (if the cannon were tested indoors. ).
All terminology aside, great little cannon. Perhas you could acquire a small CO<sub>2</sub> regulator and go for portable, this New Year's, if chamber size permits...
).All terminology aside, great little cannon. Perhas you could acquire a small CO<sub>2</sub> regulator and go for portable, this New Year's, if chamber size permits...
I'm going to be away on New Year's, so no go. You could call them chaff, but no one would have a clue what you're talking about (anyway, the "chaff" name is reserved for the remains of the target I shot today, or maybe "toothpicks" would be more appropriate...)
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
mark.f
- Sergeant Major 4
- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
- Contact:
You get them from a gas supply, (ideally a local one so you can get refills). Welding supplies are fairly common around here, and they sell inert gases for things like arc welding.
I would suggest SCUBA air if you can't find a gas supply, though.
I would suggest SCUBA air if you can't find a gas supply, though.
Industrial tanks with normal connections (CGA 580 for nitrogen) are far easier to find regulators for than SCUBA tanks. I know you could adapt a SCUBA tank to a 0-500 psi regulator, but it would require a custom adapter, and air is more dangerous than pure nitrogen anyway.
Even most small towns have a basic gas supply, and nitrogen is one of the most common industrial gases, probably behind things like oxygen acetylene, and argon.
Even most small towns have a basic gas supply, and nitrogen is one of the most common industrial gases, probably behind things like oxygen acetylene, and argon.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.