first pneumatic

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Post Reply
User avatar
freder
Private 2
Private 2
Posts: 36
Joined: Mon Sep 17, 2007 12:50 pm
Location: GERMANY

Sat May 16, 2009 7:20 am

Hey guys,

this is my first pneumatic ever :lol:
I first tried to built it with a piston but that kinda didn't seel :(
so used a simple ballvalve

I don't have a compressor so I use my bikepump to pressure it.
I usually shot at 160 psi (good exercise with the pump :D )
I can switch the barrels. got a 7.5mm and a 14mm one.
Home made bibod as you can see :wink:
& an old stock from my crappy spudgun :lol:

I know I have to get a scope for it. I'm working on that :lol:
I'm going to paint the barrels & the bipods black and
maybe finish the guilly thing around it.

I can hit a torso big target at ~60 yard with a few crappy softair-BBs
Not that bad but I'm thinking of buying some heave metal ones.
& building some nice darts for the bigger barrel :twisted:

Enough talking here are some pics:
(Sry about the crappy quali made them with my webcam)
Attachments
looking down the barrel of the gun
looking down the barrel of the gun
8.JPG (28.59 KiB) Viewed 2970 times
bipod folded in
bipod folded in
5.JPG (13.11 KiB) Viewed 2970 times
most important :D
most important :D
9.JPG (32.29 KiB) Viewed 2970 times
good look at the bipod
good look at the bipod
7.JPG (31.24 KiB) Viewed 2970 times
Sniper next to my Airsoft-M4
Sniper next to my Airsoft-M4
6.JPG (29.56 KiB) Viewed 2970 times
painted it + reddot :D<br />you can see the 14mm and new 6mm barrel on the floor and the 7.5mm attached to the gun
painted it + reddot :D
you can see the 14mm and new 6mm barrel on the floor and the 7.5mm attached to the gun
fertig.JPG (11.14 KiB) Viewed 2851 times
Last edited by freder on Sun May 17, 2009 8:06 am, edited 1 time in total.
Top
User avatar
inonickname
First Sergeant 4
First Sergeant 4
Posts: 2606
Joined: Sun Dec 07, 2008 3:27 am

Sat May 16, 2009 10:11 am

It's alright. Springloading the BV will give you a noticeable performance boost.

Very good for a first, would be good to ditch the tape though. Grab some better pictures and we should be able to say more.

Good job
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
Top
thedeathofall
Specialist 2
Specialist 2
Posts: 213
Joined: Tue May 06, 2008 10:43 pm

Sat May 16, 2009 10:36 am

its not bad but as you already know the ball valve is definitely not the best you can do. perhaps a modified sprinkler valve is due? anyway, its not bad for a first. at least it works :wink:

get some damage pics with a better camera while your at it
"I'm spending time without a gender for tax reasons. It's great if I get hit in the groin, but a total nightmare in the bathroom."

-Rag


Obsequium parit amicos; veritas parit odium.

-Cicero
Top
User avatar
paaiyan
First Sergeant
First Sergeant
Posts: 2140
Joined: Wed Dec 27, 2006 10:03 pm
Location: Central Oklahoma
Been thanked: 1 time

Sat May 16, 2009 11:00 am

What exactly is that wrapped around the stock?
"Who ever said the pen was mightier than the sword, obviously, never encountered automatic weapons."
-General Douglass MacArthur

Read my dog's blog - Life of Kilo
Top
User avatar
freder
Private 2
Private 2
Posts: 36
Joined: Mon Sep 17, 2007 12:50 pm
Location: GERMANY

Sat May 16, 2009 2:34 pm

thanks. It's hard/expencive to get a sprinklervalve here so I think I´m going to try to seal the piston valve thing and give that an other try.

@paaiyan: :lol: its an old jeans that I had laying around, spraypainted camo and teard appart :D works pretty good
Top
Post Reply

Return to “Pneumatic Cannons”