just wanted to confirm how i could increase the muzzle velocity of my pneumatic rifle ????
Should i try increasing the chamber volume or should i try increasing the chamber pressure???
(Currently running 30 cubic inches at 150 psi)
Help Needed......thnx!!!!
CHEERS
First airgun, 40bar/580psi (damage vids) (Updated)
What is most efficient depends on the barrel. How long barrel u have and what is the diameter at the barrel?HACKERZLORD007 wrote:just wanted to confirm how i could increase the muzzle velocity of my pneumatic rifle ????
Should i try increasing the chamber volume or should i try increasing the chamber pressure???
(Currently running 30 cubic inches at 150 psi)
Help Needed......thnx!!!!
CHEERS
Last edited by Tobin on Sat Jun 11, 2011 6:54 pm, edited 1 time in total.
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Yeah we need more specfications like barrel length, chamber length/diameter, valve...
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
Both will do it, but I'd suggest increasing pressure since that's usually easier, but not if you'd be pushing the pressure rating on components.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Increasing chamber volume is effective up to a point, after that could can double the volume and only get a 1% increase in velocity. Increasing pressure on the other hand should give a roughly linear increase in power.
Download Gas Gun Design Tool and have a play before cutting.
Download Gas Gun Design Tool and have a play before cutting.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
HACKERZLORD007
- Private
- Posts: 14
- Joined: Tue Jun 07, 2011 10:49 pm
em my specs are:
Fill Valve: A Bike Schrader Valve
Trigger Valve: 1 Inch Brass Ball Valve
Barrel Diameter: 0.5 inches
Barrel Length: 22 Inches
Chamber Length: 35 Inches
Chamber Diameter: 1 Inch
Average Pressure: 120 psi
Maximum holding Pressure: 500 psi+
Chamber Volume: 30 cubic Inches
Building Material: Galvenized Metal
Fill Valve: A Bike Schrader Valve
Trigger Valve: 1 Inch Brass Ball Valve
Barrel Diameter: 0.5 inches
Barrel Length: 22 Inches
Chamber Length: 35 Inches
Chamber Diameter: 1 Inch
Average Pressure: 120 psi
Maximum holding Pressure: 500 psi+
Chamber Volume: 30 cubic Inches
Building Material: Galvenized Metal
Then increased chambervolume wont make any noticable differenceHACKERZLORD007 wrote:em my specs are:
Fill Valve: A Bike Schrader Valve
Trigger Valve: 1 Inch Brass Ball Valve
Barrel Diameter: 0.5 inches
Barrel Length: 22 Inches
Chamber Length: 35 Inches
Chamber Diameter: 1 Inch
Average Pressure: 120 psi
Maximum holding Pressure: 500 psi+
Chamber Volume: 30 cubic Inches
Building Material: Galvenized Metal
-
Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
HACKERZLORD007 wrote:just wanted to confirm how i could increase the muzzle velocity of my pneumatic rifle ????
Should i try increasing the chamber volume or should i try increasing the chamber pressure???
(Currently running 30 cubic inches at 150 psi)
Help Needed......thnx!!!!
CHEERS
wit hi preshaaaa
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
-
Labtecpower
- Sergeant 3
- Posts: 1297
- Joined: Sat Feb 20, 2010 6:38 am
- Location: Pyongyang
- Has thanked: 5 times
- Been thanked: 13 times
better valve.
CHEERS!!!!1!
CHEERS!!!!1!