does ane one know the actual firing presur of a PBG?

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
smallebee
Private
Private
Posts: 11
Joined: Wed Jun 08, 2011 5:15 am

Thu Jun 16, 2011 10:41 am

the designs for my paint ball gun are almost finished. because there is already a QVE in ti i have decided to add a selector valve to my exaust port on selection 1 i will have nothing the gun will react normally and shoot a single round. on selection 2 i will have a poppet valve giving my paint ball gun a new edge.

now to do this i need crucial infirmation.
:arrow: what is the firing pressure of a paint ball gun.
:arrow: a sugestion for a suitibial regulator for the compressed air into the chambers. VERY IMPORTANT MUST TURN OF WHEN pressure IS REACHED.
:evil: I DO NOT LIKE PVC SPLINTERS IN MY FACE.

on a lighter note the semi outo settin will be slightly more powerful than auto because the poppet valve fires at a slightly lower pressure than the source so that it fires.
User avatar
cammyd32
Specialist 3
Specialist 3
Great Britain
Posts: 326
Joined: Fri Apr 29, 2011 7:00 am

Thu Jun 16, 2011 10:50 am

Normal paintball guns can operate at pressures from 100 psi - 1000 psi upwards, for your designs I would suggest about around the 100- 300 psi range (this is the firing pressure for your average paintball gun)
but pressure- power really depends on how big your chamber is cos the longer barrel and the bigger the chamber the lower pressures you can operate your gun at.
I have made paintball guns out of pvc that fired at about 80 psi with a long barrel, it was only single shot but that pressure was enough to make it a very accurate and powerful gun.
Hope this helps :D
smallebee
Private
Private
Posts: 11
Joined: Wed Jun 08, 2011 5:15 am

Thu Jun 16, 2011 10:57 am

it does i'm trying to get around 400dfps on the auto setting. i'm hoping to use a 21" tipmans barrle. plus the semi auto setting adds aquarasy dew to the slight rise in pressure.
User avatar
SP00K
Specialist 2
Specialist 2
Posts: 212
Joined: Wed Dec 03, 2008 4:20 pm
Location: Ohiya

Fri Jun 17, 2011 6:34 am

goong back over psts befoar clicking sumit and prooparly spelling woards is overreated.
We are all worms, but I do believe I am a glow worm.

~Winston Churchill~
smallebee
Private
Private
Posts: 11
Joined: Wed Jun 08, 2011 5:15 am

Sat Jun 18, 2011 1:52 pm

im still looking for sujestions for a regulator.
User avatar
Fnord
First Sergeant 2
First Sergeant 2
Posts: 2239
Joined: Tue Feb 13, 2007 9:20 pm
Location: Pripyat
Been thanked: 1 time
Contact:

Sat Jun 18, 2011 2:18 pm

Look here.

Find something that has the same tank thread type you want, then verify it with us to make sure you didn't overlook something. You probably won't need more than 200 psi, even with a shorter barrel.
smallebee
Private
Private
Posts: 11
Joined: Wed Jun 08, 2011 5:15 am

Thu Jun 23, 2011 8:14 am

:?: longer one ye.
smallebee
Private
Private
Posts: 11
Joined: Wed Jun 08, 2011 5:15 am

Thu Jun 23, 2011 9:12 am

and i still need regulator sugestions. desighns coming soon. :o
User avatar
Crna Legija
First Sergeant 2
First Sergeant 2
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia

Thu Jun 23, 2011 10:55 am

Palmers Pursuit Stabilizer is always being link as a good reg, iv never used but lots of SF members use them and FFS use the edit button
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
Post Reply