working on the hammer valve-VIDEO UPDATE!

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Mon Jun 30, 2014 4:12 pm

brave wrote:i may do it only with a video editor
Well then you'll have to find another reason to leave the house! :bigsmurf:
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Tue Jul 01, 2014 1:30 pm

jrrdw wrote:
brave wrote:i may do it only with a video editor
Well then you'll have to find another reason to leave the house! :bigsmurf:
not a reason my neighbors want to hear about......too bad i broke the gun ,.........
come undone
User avatar
Dig_Gil
Private 2
Private 2
Posts: 36
Joined: Wed Jan 29, 2014 6:33 am
Location: Somewhere between Moscow and Azores

Sat Jul 12, 2014 8:52 am

Sexy... Hammer-valve shooters have a special charm to them, don't they?
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Sat Jul 12, 2014 12:01 pm

Dig_Gil wrote:Sexy... Hammer-valve shooters have a special charm to them, don't they?

they know it's an airsoft toy :roll:
Funny is that i dont hear it as loud as my wife says it sounds .....i even made a silencer (from a printer iternals) that reduced a lot....an she still say ..."Calm down"!!Damn it!(
come undone
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Sun Sep 07, 2014 11:12 am

So, latest update. i had bought a 650 mm ACM innox airsoft barrel to put it on this gun, hoping it will perform much, much, much better than aluminuim pipes i had used before.
Well, it does shoot worse by 20 than i shoot to 40 m with those pipes....not one stell bb close to other one.( by this distance i was able to shoot same hole with steel bb.s)
.......the difference is that with those aluminium pipes i had friction with the bb., sort of like rifled airguns.....

any suggestions ?

does anyone's gun here shoot bb's perfectly ? cuz i know it's possible ...
come undone
User avatar
wyz2285
First Sergeant 2
First Sergeant 2
Austria
Posts: 2385
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Has thanked: 1 time
Been thanked: 3 times
Contact:

Mon Sep 08, 2014 5:45 am

Well I got VERY good results with a KJW M700 on HPA, enlarged hop window and R-hoped, polished the inner surface of the barrel on my lathe too... But that's with airsoft BBs.
CpTn_lAw wrote: :D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Mon Sep 08, 2014 9:52 am

wyz2285 wrote:Well I got VERY good results with a KJW M700 on HPA, enlarged hop window and R-hoped, polished the inner surface of the barrel on my lathe too... But that's with airsoft BBs.
i had cut off the hop up part of the barrel ....
Any how my goal was that when i need the gun (rather is 1, 3 months) to shoot like it is suposed to.
May be my next update will be with a rifled airgun barrel...........
come undone
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Mon Sep 08, 2014 4:19 pm

bravootome wrote:
wyz2285 wrote:Well I got VERY good results with a KJW M700 on HPA, enlarged hop window and R-hoped, polished the inner surface of the barrel on my lathe too... But that's with airsoft BBs.
i had cut off the hop up part of the barrel ....
Any how my goal was that when i need the gun (rather is 1, 3 months) to shoot like it is suposed to.
May be my next update will be with a rifled airgun barrel...........
if i think better i would of buied "an edgun matador" with the money i had spent on differnt tipes of bb's, pipes, scopes, hpa gear...etc....in the past of 3 years.....
come undone
User avatar
bladeul2006
Private 3
Private 3
Posts: 56
Joined: Wed Feb 13, 2013 12:08 pm

Thu Oct 30, 2014 3:04 pm

same for me bro...
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Fri Oct 31, 2014 12:36 am

My eggplant crop ...Nothing to do with airguns............
Last edited by bravootome on Sat Nov 15, 2014 12:50 am, edited 1 time in total.
come undone
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Sat Nov 01, 2014 8:48 am

That looks like a nice haul...Worth the investment?
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Sat Nov 01, 2014 10:51 am

jrrdw wrote:That looks like a nice haul...Worth the investment?

Sometimes no, but if it is a good year and the right treatment is applied , production for 1 ha is over 100-150 tons....i dont know any other plant that produces this quantity ...
so no matter the price of eggplant is, it worth the investment ...or not....
come undone
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Fri Jan 23, 2015 4:12 am

I installed softchorono app on my phone today and did some tests :

With the Qev and a 0.40 grams bb i got 790 fps. ( the gun was not fully charged, so i think it can do better)

With the hammer valve( in the video) and a 0.86 grams steel bb i got 755 fps = 22.7 Jouls.....but again i think i can bring it up to 800-850 fps... after i change the valve and maybe add more pressure.....(





[youtube][/youtube]
come undone
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Wed Jul 29, 2015 10:29 am

i've been working on my eggplants, but always checking sudfiles ...
So if there is anyone here from south east Europe willing to donate an 5,5; 4.5 mm rifled barrel, i am the man to come to !
Al my efforts to purchase one has failed !
Chears !
come undone
User avatar
bravootome
Specialist 3
Specialist 3
Romania
Posts: 334
Joined: Mon Oct 14, 2013 11:11 am
Has thanked: 1 time
Been thanked: 2 times

Tue Dec 03, 2019 1:44 pm

So, i got back,. Any one ,. Wyzz.....
New project,. I ve found a vid on youtube, a Taiwan very skilled guy made a hammervalve , my experience tells me I can do it much better, only I need his skills. So I hope to post something ,. Soon....................
Admin, is there a way so get notifications on my phone regarding my post, or something.....
come undone
Post Reply