SG-Vengeance Golfball Gun

octane89 · Mon Nov 26, 2007 4:38 pm

I just read some of the astm standards a looked them up. Some say a piece is for a pressure application but on mcmaster they say not too. A little confusing to me, but I will get a grasp.

Check out my YouTube SpudGun Channel! · Mon Nov 26, 2007 4:42 pm

Being the type of person I am I kept the docket.
It was part #4880K614

mtronic · Thu Nov 29, 2007 5:09 am

paintball 1 Middle East 0
Awesome videos man. What it the silver metal looking device in the picture of your stock pile? A high pressure pneumatic?

Check out my YouTube SpudGun Channel! · Thu Nov 29, 2007 2:20 pm

Pretty much yeah, but it's limited to 150psi due to the QEV and sprinkler valve.

Check out my YouTube SpudGun Channel! · Mon Dec 10, 2007 2:56 am

Update:

T-Shirt Barrel, was originally my 80mm DWV chamber from my very first combustion, which I decided did better as a T-Shirt barrel, so I cut it up and glued on a spare 2" threaded adapter.

I tape up old T-Shirts so they don't come apart when fired and they seem to go around about 60m at 70psi and have quite a bit of kick.

Maybe a video tomorrow

Pictures on front page.

Oh yeah I know it's really messy but the chamber (now T-Shirt barrel) had about 3 holes in it and is over 2 years old and I have no spray paint whatsoever.