ABS Question
Hi, if I did not have 1 1/2" PVC but I have 1 1/2" ABS, could I use PVC for everything except for the barrel? And if it is safe, how do I glue them together? Thanks!
Last edited by n-strike on Sat Jun 14, 2008 5:14 pm, edited 1 time in total.
Yes its fine.
PVC to ABS transition glue.
PVC to ABS transition glue.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Probably, if not, look at Lowes or Ace Hardware.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
I was just doing my usual forum search to see what i missed.
Your fast to respond.
Your fast to respond.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
-
TurboSuper
- Corporal 5
- Posts: 986
- Joined: Thu Jun 16, 2005 1:44 pm
- Been thanked: 1 time
Even better- use threaded fittings.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
-
TurboSuper
- Corporal 5
- Posts: 986
- Joined: Thu Jun 16, 2005 1:44 pm
- Been thanked: 1 time
It will use cement, as you need to cement on the threaded adaptors, but you don't need special transition cement.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
-
Matheusilla
- Specialist
- Posts: 140
- Joined: Tue Feb 13, 2007 7:43 pm
In Canada you might find it at a Home Depot, Rona and just maybe at Canadian Tire.