First, does anyone know what size pipe I would need to have so that it will slide over a 1.5" sch 40 barrel?
Two, does anyone know the best way to cut out the [__] and sideways L?
Three, Am I leaving anything out?
Bolt action help.
-
Gippeto
- First Sergeant 3
- Posts: 2503
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
1) 1.5" couplers will slide on 1.5" pipe (obviously). Just dremel/file/or turn the lip out.
2) You can make the cuts with a router/dremel/rotozip, or you can drill a series of holes, and saw/file out the remaining material.
3) How would WE know?
2) You can make the cuts with a router/dremel/rotozip, or you can drill a series of holes, and saw/file out the remaining material.
3) How would WE know?
-
mega_swordman
- Corporal
- Posts: 526
- Joined: Wed Nov 29, 2006 2:37 pm
- Location: Bay Area, California
- Contact:
Make sure that the pipe is flat against the back of the bolt, otherwise you will have a really bad leaking problem.
"Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity." George S. Patton
-
man_o_brass
- Private 2
- Posts: 22
- Joined: Mon Sep 08, 2008 9:58 am
- Location: Texas
- Contact:
2" SCHD 80 works wonderfully. Depending on the manufacturer, you might have to sand out the 2" a bit for it to slide over nicely.
Hey if you get a working prototype of a bolt action cannon, could you share the design with me. I am basically trying to build a t-shirt launcher for our robotics teams to shoot at demonstrations (such as basketball games), and I would LOVE to make it bolt action so we could fire it without having to muzzle load it in front of everyone.
Thanks!
-hansdg1
Thanks!
-hansdg1