Page 1 of 1

quick sodastream reg question

Posted: Sun Sep 28, 2014 6:47 am
by Baldyforks
Hi guys, I'm just have a question about using a sodastream tank as my air supply. I have an adaptor and a flow reg that goes on the adaptor as the picture shows,
IMG_1839.gif
excuse my poor photoshop skills but you get the idea hopefully.
I'm using a full sodastream bottle for co2 and hoping to lower the pressure to under 150psi,
im wondering if I put a palmers pebble reg from the flow reg to my hose, will this create any problems?
I guess my worry is the flow reg not holding the high pressure being before the palmers reg, but it does it when I use it to turn off the flow atm, so I figured id ask, better safe then sorry

cheers for any help

Re: quick sodastream reg question

Posted: Thu Oct 30, 2014 6:29 am
by Baldyforks
wow I can not believe 80 ppl have viewed this and no one has answered it, hahha.

Re: quick sodastream reg question

Posted: Thu Oct 30, 2014 10:17 am
by Skindhead-88
I made a basic bbsmg with pretty much same sodastream setup and I didn't have any pressure loss. providing the hose is braided or high psi strength then you should be fine

Re: quick sodastream reg question

Posted: Thu Oct 30, 2014 6:46 pm
by tater slayer
It's quite possible that nobody knows the answer.

Re: quick sodastream reg question

Posted: Mon Nov 03, 2014 6:12 pm
by dart guy
I think it's the picture, spend maby about 10-45 minutes in paint and draw what your thinking in more detail. Hint: use shapes

Re: quick sodastream reg question

Posted: Thu Nov 13, 2014 4:55 am
by Baldyforks
thanks guys, ill just do it and hope for the best, I only asked really as an extra safety