Pwnany First Cannon
Here's my first cannon that I made not for looks just for performance and I think its pretty good. It shoots marbles, AA Batteries with a bit of tape and anything else that fits. I have made it with interchangeable barrels but at the moment the only barrel I have is the good old marble barrel.
Here it is without a barrel.
Here is a end cap a friend gave to me. Pretty snazzy. (Sorry for the bad quality photo but if you cant tell its a bullet)
Here is a solid metal can I shot at but it was a really bad shot and it hit the bottom and didn't go all the way through. (The further away from the middle you hit the harder it is to break)
Here's the other side where you can see it breaking out the other side just a little. (Just on the edge of the can top right corner)
Here are some dints to some sheet metal after going threw 2 solid pieces of cardboard. The metal was backed by over an inch of ply wood so there is no chance of it making a hole unless it goes threw that much wood. (It wouldn't do that) Those dints are very deep.
Here is the whole thing with the barrel.
Look at this photo of it shooting a big pile of coke cans.
Carnage
All those cans are ripped to shreds. (The ones that the marble actually hit.)
Later if I feel like it I will put together a video of me shooting stuff.
-Pwnany
Here it is without a barrel.
Here is a end cap a friend gave to me. Pretty snazzy. (Sorry for the bad quality photo but if you cant tell its a bullet)
Here is a solid metal can I shot at but it was a really bad shot and it hit the bottom and didn't go all the way through. (The further away from the middle you hit the harder it is to break)
Here's the other side where you can see it breaking out the other side just a little. (Just on the edge of the can top right corner)
Here are some dints to some sheet metal after going threw 2 solid pieces of cardboard. The metal was backed by over an inch of ply wood so there is no chance of it making a hole unless it goes threw that much wood. (It wouldn't do that) Those dints are very deep.
Here is the whole thing with the barrel.
Look at this photo of it shooting a big pile of coke cans.
Carnage
All those cans are ripped to shreds. (The ones that the marble actually hit.)
Later if I feel like it I will put together a video of me shooting stuff.
-Pwnany
Last edited by Pwnany on Tue Oct 03, 2006 3:00 am, edited 1 time in total.
-
- Private 3
- Posts: 40
- Joined: Thu Sep 21, 2006 11:23 pm
I don't think it is all metal, because I dont know where you can get black metal like that. If it is metal what kind is it - I want some!Nice first gun, I love how it's all metal (at least I'm pretty sure it is) except for the sprinkler
- killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
POS wrote:Nice gun, but if you build it for performance, you should get a bigger and compacter chamber
Is compacter even a word? Anyway Loverly gun there, get a bigger chamber and longer barrel, And to improve accuracy use RNA_DUELERS's rifleing technique.
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
- experament_u2
- Specialist 2
- Posts: 271
- Joined: Sun Aug 06, 2006 5:04 am
i like it its very strange what u have done with the chamber,
what’s it made out of?
btw nice cap
what’s it made out of?
btw nice cap
To be honest I'm not sure what its made out of. However the pipe can be used instead of the coper piping on your house for water so it must be designed to take pressure. On the stickers on it, it says Plasson. I googled it but it doesn't say how much pressure it can take.
- killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
IVE GOT IT!
Your aussie arnt you mate? The pipe was a dead giveaway.
Thats black irrigation pipe, Great stuff and its pretty cheap over here too!
Its been tested to 300psi.
Your aussie arnt you mate? The pipe was a dead giveaway.
Thats black irrigation pipe, Great stuff and its pretty cheap over here too!
Its been tested to 300psi.
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
- killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
Also the valve is a dead giveaway.
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
Great gun man I am at this moment working on my AA rifle. As I figure it I’ve spent only 30.00 on it. So far but I intend to spend 100.00 I found a way to mount a laser sight not a laser pointer. I'm thinking of putting on a Swiss or Czech bayonet and a led torch on. Right now it's a work in progress. It’s White and I was wondering what to paint it? Camo or silver or black I don’t know? What do you think I might try to put on a gun stock? But I took off the ball valve. And I’m going to add a modded sprinkler valve and the tape is just to see how it looks.
Ps I also have acess to a plastic welder what do you think. thanks
Ps I also have acess to a plastic welder what do you think. thanks
- Attachments
-
- 2003_1213Image0017.JPG (15.82 KiB) Viewed 5863 times
- Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
please dont kick up 5 month old topics...
look at the last time someone posted, and they were kicking up a 6 month old topic, please let them R.I.P.
look at the last time someone posted, and they were kicking up a 6 month old topic, please let them R.I.P.
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.