Can't figure out if mcmaster pipe fittings are pressure rate

[JDP12]

Hey all,

Well after building my advanced combustion ( pics will hopefully be up soon) I've decided to build a barrel-sealing piston gun..

But I can't figure out if the fittings on mcmaster are pressure rated!!! It says if the pipe is, but for an end cap for example, this is all it says.

Shape
Cap

Schedule
40

Pipe Size
4"

Pipe to Pipe Connection
Socket-Weld x Socket-Weld

Material
PVC

Color
White

Maximum Temperature
140° F

WARNING
Never use plastic pipe fittings with compressed air or gas.

Specifications Met
American Society for Testing and Materials (ASTM) and National Sanitation Foundation (NSF)

ASTM Specification
ASTM D1784 and ASTM D2466

NSF Specification
NSF 61


so does any of those specs tell me if it is pressure rated?? IN an earlier topic, someone said that the NSF 61 said that it is pressure rated..But no one confirmed it. So I would like to be sure...Thanks guys.

[sandman]

if it says sch 40 or 80 it is rated as far as i know

but if it says gravity something then is is not rated

[Scope]

Sandman sch 40 or 80 is only a measure of thickness. and does not indicate pressure rated.

I think nsf61 is pressure rated. it is put in the same category as in able to contain drinking water.

[cork9]

I buy all my pipe from mcmaster they sell both if ur under schedual 40 or 80 its pressure rated even though it sais no gas or whatever

[JDP12]

mm k thanks guys..just want to make sure

[frankrede]

I believe all of mcmaster sch-40 and 80 fittings are nsf-pw unless specified that they aren't