would this barrel mod be safe?
-
- Private 3
- Posts: 59
- Joined: Mon Jun 04, 2007 1:55 pm
i want to put a 6 inch piece of 2 inch pvc over the end ofmy 1 1/2 inch pvc barrel so i can fit bigger things in it, but if u shoot something out of the end of the barrel instead of shooting it packed in way at the bottom will it blow the barrel? once i packed a spud at the very end of my combustion barrel about 5 inches down and it blew apart, will it happen with an air cannon too?
-
- Private 3
- Posts: 59
- Joined: Mon Jun 04, 2007 1:55 pm
it did with my combustion gun, only packed a spud 5 inches down a 5ft barrel and the end of the barrel blew apart, so im wondering if the same would happen with an air one
- Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
I have a 2" barrel that attaches to my 1.5" barrel so I can shoot off my used primer/cement cans when I finish them or they dry out.
It works fine and I can shoot them across my yard and over the fence into "not my property."
It works fine and I can shoot them across my yard and over the fence into "not my property."
-
- Private 3
- Posts: 59
- Joined: Mon Jun 04, 2007 1:55 pm
so is it gunna be safe and will u get good distance with it?
- Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
I don't see why not.Matt221985 wrote:so is it gunna be safe and will u get good distance with it?
-
- Private 3
- Posts: 59
- Joined: Mon Jun 04, 2007 1:55 pm
lol, cuz i know with my combustion on i blew the barrel..ill have to try this in a min and see, gotta spare 6 inch piece of 2inch layin around, just gunna glue it on
- Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
Matt221985 wrote:lol, cuz i know with my combustion on i blew the barrel..ill have to try this in a min and see, gotta spare 6 inch piece of 2inch layin around, just gunna glue it on
Your performance will be drastically reduced due to all the dead space. You might as well just make interchangable barrels. That would be a much more efficient option than just gluing more pipe to your barrel.
Plus it's kind of unwieldily, at least when I attach the extra barrel.
- TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
Let me put it this way, either I am confused again and have gone into the discussion forum or this is in the wrong place. Mate its safe as stated above. A projectile is a projectile and it will move when gases expand. And mate try and post this stuff in the proper forum.
Raise your horns if you love metal.
CpTn_lAw
-spudgunning is like sex, once you've tasted, you can't wait til next time.
CpTn_lAw
-
- Private 3
- Posts: 59
- Joined: Mon Jun 04, 2007 1:55 pm
"Mate" this is the proper forum, all talk about air cannons...
- rednecktatertosser
- Corporal
- Posts: 590
- Joined: Tue May 22, 2007 7:52 pm
yeah i have done that before, it seemed to work fine for me.
-
- Staff Sergeant
- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
uh do you know what blow up means... blow up whould be for a solider shooting rifle grenades with a live bullet rather than a blank
if you mean will it fly off if i try attaching it by friction and not glue it properly, than yes
will it blow up if i put acetone peroxide or contact explosive in yes
will it blow up if i put an alkline metal in the big barrel and water in the small one yes
is this a stupid mod cause the huge dead space compared to having inerchangable barrels yes
if you didn't glue the barrel bolt it or didn't have some way other to conect it, then I have to say you a dum dum
if you mean will it fly off if i try attaching it by friction and not glue it properly, than yes
will it blow up if i put acetone peroxide or contact explosive in yes
will it blow up if i put an alkline metal in the big barrel and water in the small one yes
is this a stupid mod cause the huge dead space compared to having inerchangable barrels yes
if you didn't glue the barrel bolt it or didn't have some way other to conect it, then I have to say you a dum dum
Last edited by iknowmy3tables on Fri Jun 08, 2007 12:00 pm, edited 1 time in total.