over under camo cannon now with DMG
this is my second combustion that I affectionately named "Attila"
I made this one out of all the scraps that I had left over from my first cannon. I love it though, its got some poke in it. my fav ammo is wadding filled with marble buckshot
It wasnt a well thought out project as you can see by the pics ie battery and the c:b is out. I've fixed the battery as that was only temp. to run the fan. Im also going to extend the barrel to bring the ratio back down(i love you spud tool) a bit cos its f#cking loud atm
I was proud of my trigger mounted into the 2nd handle, it took a little bit of fiddling getting it to fit at first. Last of all I like my paint job makes it personal, Im planning on adding like a couple of tally marks ie like of fighter jets and some sweet skulls should do the trick:)
let me know what you think or if you have any questions:)
The dmg shots were from 15 meters away, I used a mix of starter fluid and MAPP gas.
I made this one out of all the scraps that I had left over from my first cannon. I love it though, its got some poke in it. my fav ammo is wadding filled with marble buckshot
It wasnt a well thought out project as you can see by the pics ie battery and the c:b is out. I've fixed the battery as that was only temp. to run the fan. Im also going to extend the barrel to bring the ratio back down(i love you spud tool) a bit cos its f#cking loud atm
I was proud of my trigger mounted into the 2nd handle, it took a little bit of fiddling getting it to fit at first. Last of all I like my paint job makes it personal, Im planning on adding like a couple of tally marks ie like of fighter jets and some sweet skulls should do the trick:)
let me know what you think or if you have any questions:)
The dmg shots were from 15 meters away, I used a mix of starter fluid and MAPP gas.
- Attachments
-
- side view.jpg (29.2 KiB) Viewed 3860 times
-
- dent.jpg (22.22 KiB) Viewed 3860 times
-
- splat.jpg (27.82 KiB) Viewed 3860 times
Last edited by mtronic on Tue Aug 14, 2007 10:11 pm, edited 1 time in total.
- TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
Thats some quality work mate. Keep it up :thumbright:
Raise your horns if you love metal.
CpTn_lAw
-spudgunning is like sex, once you've tasted, you can't wait til next time.
CpTn_lAw
- TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
NSW and Im partial to both actually. I love the loudness and portability of combustions yet the reliablility and power of a pneumatic.
Raise your horns if you love metal.
CpTn_lAw
-spudgunning is like sex, once you've tasted, you can't wait til next time.
CpTn_lAw
base paint with the fawn then just with a 2.5 " brush kinda mushed the brush at it with the brown and greenhow did u get the cammo effect ?
Im from NSW too. I live out of richmond at the base of the Blue Mnts. I love combustions, they are good to impress ppl with. I'll probably love my marble gun too when I get a compressorNSW and Im partial to both actually. I love the loudness and portability of combustions yet the reliablility and power of a pneumatic.
- Flying_Salt
- Corporal 3
- Posts: 779
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: Texas
I like it, nice work, but that's a really funky-looking reducer coming from your chamber.
sgort87 wrote: I hereby present Flying_Salt with The one and only <a href="http://www.geocities.com/sgort87/ghetto">Ghetto Award!</a>
Thanks man, yeah for some reason the shop only has reducers that are off center, im not sure if it would affect its performance or not.
I get an average distance of 150 meters out off it using ping pong balls filled with sand. My other comb. has one too.
I get an average distance of 150 meters out off it using ping pong balls filled with sand. My other comb. has one too.
- turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
Cool gun,
Maybe some metered propane (if you dont already have it)
and a stun gun iginition?
Im a pnumatic guy (never made a cumbustion in my life)so I really dont know what to comment on other than "cool"
Maybe some metered propane (if you dont already have it)
and a stun gun iginition?
Im a pnumatic guy (never made a cumbustion in my life)so I really dont know what to comment on other than "cool"
<-- This is not a cat avatar
If it walks like a dog, sratches like a dog, and barks like a dog, than its probobly a...-TURTLE, it's a TURTLE!!! Cant you see?!!!
If it walks like a dog, sratches like a dog, and barks like a dog, than its probobly a...-TURTLE, it's a TURTLE!!! Cant you see?!!!
frankrede wrote:Great googlay mooglay!
Thats a beast!
I was thinking about this earlier this morning
At the moment I use Nulon "start ya bastard" engine starter. It's 25% dimethyl ether and works pretty well approx 150 meters. But I was pondering whether on board metered propane would be that much better i.e cost v extra distance?
I would definitely like to pimp this cannon out! I'm thinking of putting the laser and tac light on this cannon instead of the marble gun as Attila is hip fired and it would make it a hell of a lot easier to target things.
Well any suggestions from you guys with knowledge of whether it would be worth switching over to metered propane would be much appreciated, I'm about to trawl for some ideas.
Thanks for all the comments
At the moment I use Nulon "start ya bastard" engine starter. It's 25% dimethyl ether and works pretty well approx 150 meters. But I was pondering whether on board metered propane would be that much better i.e cost v extra distance?
I would definitely like to pimp this cannon out! I'm thinking of putting the laser and tac light on this cannon instead of the marble gun as Attila is hip fired and it would make it a hell of a lot easier to target things.
Well any suggestions from you guys with knowledge of whether it would be worth switching over to metered propane would be much appreciated, I'm about to trawl for some ideas.
Thanks for all the comments
- Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
(sorry to kick up the topic)
on that reducer that you have, do you know what it was called, like how they name an off center reducer? i really need to get one of these if they have them where i live in pressure rated forms...
p.s. in the future, if i were you, i would flip the reducer upside down, to make the gun more compact.
on that reducer that you have, do you know what it was called, like how they name an off center reducer? i really need to get one of these if they have them where i live in pressure rated forms...
p.s. in the future, if i were you, i would flip the reducer upside down, to make the gun more compact.
yeh thanks man, um I live a bit out of Sydney so if you live in Australia then you'll probably find them at the plumbing shop, just make sure you get the pressure rated gear. I needed the space to fit the handles.
This cannon is in bits and pieces now, mostly made the barrel into part of a suppressor and using the internals for a better comb. as this one was made before I really knew much about c:b and so forth, it was still hell powerful though
This cannon is in bits and pieces now, mostly made the barrel into part of a suppressor and using the internals for a better comb. as this one was made before I really knew much about c:b and so forth, it was still hell powerful though
Always out numbered....
never out gunned
never out gunned