Hey guys. I have a real quick question, so I have an electric bbq ignitor it's pretty much the same one featured in this thread. Link: http://www.spudfiles.com/forums/mod-an- ... 14589.html
Anyways. I was thinking about wiring some sort of safety switch to it. However I'm not to sure if it could be done. Here's what I was thinking please see the attached image. Any input on how to do this would be most helpful. Thanks!
Safety Switch
Put the safety switch in series with the low voltage side. Almost any switch would arc over on the high voltage side. You may have to move the battery out of the case of the ignitor.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name
-
- Private 4
- Posts: 91
- Joined: Wed Jul 07, 2010 5:28 pm
A momentary switch is usually best for safety situations. On my steel over-under, I have a momentary push-button on each handle of the launcher. Both wired in series on the low voltage side of the igniter so they both have to be pressed to activate the ignition system.
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
The title of "Worse Diagram Drawer" has been passed from me to you, its not meant as offensive, rather, it is an honor to have a title...
- Sonicboom101
- Private 3
- Posts: 46
- Joined: Wed May 09, 2007 5:49 pm
- Location: Centerville, UT
I'm not sure if I know what you mean by putting it in series with the low voltage side. I know what putting in series means but I have never heard putting it on the low voltage side. Sorry for me being a noobie...
-
- Specialist
- Posts: 185
- Joined: Mon Jan 03, 2011 7:20 pm
No offense, and not trying to be mean, but when I first saw the diagram, I mistaked it for something entirely diffrent
- jimmy101
- Sergeant Major
- Posts: 3199
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 17 times
- Contact:
It means you should put the switch(es) in series with the battery and not the spark gap.Sonicboom101 wrote:I'm not sure if I know what you mean by putting it in series with the low voltage side. I know what putting in series means but I have never heard putting it on the low voltage side. Sorry for me being a noobie...
The battery supplies a couple volts, which can't jump a gap. The high voltage side of the device supplies many thousand of volts which will quite happily jump across the contacts inside a typical switch.
- Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
nadjatee1996 wrote:The title of "Worse Diagram Drawer" has been passed from me to you, its not meant as offensive, rather, it is an honor to have a title...
but you don't need get sad, you now hold the stupidest question ever asked' title its a true honour the be among you
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
- Sonicboom101
- Private 3
- Posts: 46
- Joined: Wed May 09, 2007 5:49 pm
- Location: Centerville, UT
Thanks for the help, for people that did help. For the rest of you that were complaining about my diagram. No offense but your seriously off topic, just thought I'd spit that out. Peace!