kamelhmmvafan wrote:I would like to know other names for 2 components:
Gas Discharge Tube, Spark Gap
SIDAC
Littelfuse/Teccor K3002G is a 300V SIDAC
What would the correct search term be for perboard with single squares instead of dots or lines that seems to be standard?
Search EBAY Prototype Circuit Board
The 2SD1960 transistor, I cant seem to find an equal replacement, can somebody help me out?
What transistor is it on the Kodak board?
2SD965 and EBAY has them.
How to: Make a stun gun with a disposable flash camera
-
kamelhmmvafan
- Private
- Posts: 12
- Joined: Fri Mar 15, 2013 3:39 pm
Thanks jrrdw, im gonna call mouser this afternoon and see about shipping. Seems a bit harsh with 20euro for shipping since we are located in the same country. If they dont have their supplies located at a different location.
Thanks dewey-1! Im having problem finding SIDACs but seems like mouser have spark gaps so it should be ok
Regarding the proto board it seems hard to just find single square ones. (single copper squares)
And last I also found that the 2SD965 should work fine as equivalent a few minutes before you posted used alltransistors.com
Thank you both very much for your help!
Thanks dewey-1! Im having problem finding SIDACs but seems like mouser have spark gaps so it should be ok
Regarding the proto board it seems hard to just find single square ones. (single copper squares)
And last I also found that the 2SD965 should work fine as equivalent a few minutes before you posted
used alltransistors.com Thank you both very much for your help!
-
kamelhmmvafan
- Private
- Posts: 12
- Joined: Fri Mar 15, 2013 3:39 pm
Exactly what I want, but that price tag is ridiculous. I like the square boards since its so easy to bridge the connections with just solder, dont need any jumpers/leads
http://www.ebay.com/itm/251162897652?ss ... 1438.l2649 found this atleast its about half price.
Its real hard to search for these since they have like 50 names for it, breadboard, perfboard, matrixboard, experiment board, testboard, proto board etc
I bought my others
http://www.ebay.com/itm/10Pcs-DIY-Proto ... 2897652%26 like 10 for $2
I got my HV coil today or ATV ignition coil. Its totally in capsuled in epoxy, any good ideas how to get it out smoothly?
Acetone or thinner was what i could find that might soften up the epoxy, buying it tomorrow for some testing
http://www.ebay.com/itm/251162897652?ss ... 1438.l2649 found this atleast its about half price.
Its real hard to search for these since they have like 50 names for it, breadboard, perfboard, matrixboard, experiment board, testboard, proto board etc
I bought my others
http://www.ebay.com/itm/10Pcs-DIY-Proto ... 2897652%26 like 10 for $2
I got my HV coil today or ATV ignition coil. Its totally in capsuled in epoxy, any good ideas how to get it out smoothly?
Acetone or thinner was what i could find that might soften up the epoxy, buying it tomorrow for some testing
Do not remove coil from epoxy casing! It is there to prevent arcing to external surfaces! Post a link and/or picture and part number of this coil.kamelhmmvafan wrote:I bought my others
http://www.ebay.com/itm/10Pcs-DIY-Proto ... 2897652%26 like 10 for $2
I got my HV coil today or ATV ignition coil. Its totally in capsuled in epoxy, any good ideas how to get it out smoothly?
Acetone or thinner was what i could find that might soften up the epoxy, buying it tomorrow for some testing
-
kamelhmmvafan
- Private
- Posts: 12
- Joined: Fri Mar 15, 2013 3:39 pm
I made my own High voltage coil, i puted 2x 1.5v 800mAh battery's, 2x 224k 400v capacitors, and a spark gap that i found from a powersupply (PC). I tryed all that, worked but the spark gap needed to be tucked and untucked from the coil to work, my Homemade coil gived me 1k + Volts but my camera circuit burned 
now my project failed, i will try to build my own circuit, if you have any pls send me link, thank.
now my project failed, i will try to build my own circuit, if you have any pls send me link, thank.-
kamelhmmvafan
- Private
- Posts: 12
- Joined: Fri Mar 15, 2013 3:39 pm
help me! being a girl is no excuse but i need a made for idiots (and girls) guide how to make stungun with camera. i had one a friend made me but sum 1 nicked it an i wanna make my own! good for stoppin people snoopin in handbag etc! lol can any 1 help??*-) 
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Instructables are usually made for idiots: http://www.instructables.com/id/home-made-stun-gun/
Why you would want something like that in your handbag is beyond me though. Do you switch it on and chuck it in? If so, what do you do when you need something from the bag? Do you constantly have to wear gloves?
Why you would want something like that in your handbag is beyond me though. Do you switch it on and chuck it in? If so, what do you do when you need something from the bag? Do you constantly have to wear gloves?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
If you cannot figure out how to make one of these than you probably shouldn't have one....
Go Bruins!!!!
-
mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
If you cannot figure out how to make one of these than you probably shouldn't have one....
Go Bruins!!!!
-
BungEyeMagoo
- Recruit
- Posts: 1
- Joined: Mon Aug 26, 2013 4:46 am
First i would like to say!
What an excellent Forum So much info..
What an excellent Forum So much info..
