rubber bung / reloading
-
maddman234
- Recruit
- Posts: 2
- Joined: Mon Sep 17, 2007 5:22 am
hey i was wondering how to put a rubberbung or a vaulve on my spud gun so i dont have to keep unscrewing the back cap to put my propellent plz help
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
http://www.spudfiles.com/forums/combust ... se-f2.html
Please search in the future, spend a few hours going through all the cannons and you will find your answer, if you are willing to spend sometime to help yourself, I will be more then happy to spend some of my time to help you.
Please search in the future, spend a few hours going through all the cannons and you will find your answer, if you are willing to spend sometime to help yourself, I will be more then happy to spend some of my time to help you.
-
CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
Get a steel 3/4 ball valve and mount it onto the chamber of your cannon. You can open the ball valve, spray into it, then close the ball vavle before you shoot. Just make sure you mount the ball valve well, maybe put a bolt on the part of the ball vavle that is inside your chamber to keep it from flying out from the explosion pressure.
Spudding Is dangerous, I learned the hard way:
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
-
markieclarkie
- Private 3
- Posts: 49
- Joined: Tue Aug 28, 2007 5:12 pm
you still have to put fresh air in there
-
ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
ermm maybe some people don't have a few hours to spend looking through cannons on the internet.MrCrowley wrote:http://www.spudfiles.com/forums/combust ... se-f2.html
Please search in the future, spend a few hours going through all the cannons and you will find your answer, if you are willing to spend sometime to help yourself, I will be more then happy to spend some of my time to help you.
You could do that but there are better ways. a simple will help you find them. If you do decide to do this then make sure you bolt it before you shoot or you have one hell of a cap gun on your hands.maddman234 wrote:hey i was wondering how to put a rubberbung or a vaulve on my spud gun so i dont have to keep unscrewing the back cap to put my propellent plz help
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Well i'm sorry to say this then, but if you don't have time to read up on and learn more about spudguns and you would prefered to get spoon-fed instead because you are too busy, well you shouldn't be building spudguns at all.ALIHISGREAT wrote:ermm maybe some people don't have a few hours to spend looking through cannons on the internet.MrCrowley wrote:http://www.spudfiles.com/forums/combust ... se-f2.html
Please search in the future, spend a few hours going through all the cannons and you will find your answer, if you are willing to spend sometime to help yourself, I will be more then happy to spend some of my time to help you.
well not to be mean or anything, but "madman234" shouldnt make posts like these when the information is there for the taking, we are not here to spoon feed people with what they want. mmkThe Kid wrote:no madman234 never does anything (hes personal friend) he has all the time in the world but he just can't be bothered.
