this post is mainly geared twords starman and homedepot pro.
I am currently modifying my spray and pray to use propane and I have it almost done. I just need to know a few little details. I am useing a fueling system similar to the one on starmans triple thunder. (I had a similar idea, his was better designed and executed so I "borrowed" the plans.)
All I need to know is what did you use to connect to the propane bottle. was it one of those propane torches? and also I need to know what fitting did you use to connect the adapter attached to the propane bottle to the 1/4 shut off valve. After I sort out these details the cannon will be done.
Propane Meter help.
-
jimmy101
- Sergeant Major
- Posts: 3199
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 17 times
- Contact:
You can use an adapter on the propane tank but they are sometime hard to find.
If it's a Bernzomatic torch you can just unscrew the air mixer from the torch head and use a short length of pressure tubing and a hose clamp. Connect the hose to the chamber via a barbed fitting to a 1/4" NPT thread. Your local hardware store should have the hose and barbed fitting that'll fit the Bernzomatic torch head.
If it's a Bernzomatic torch you can just unscrew the air mixer from the torch head and use a short length of pressure tubing and a hose clamp. Connect the hose to the chamber via a barbed fitting to a 1/4" NPT thread. Your local hardware store should have the hose and barbed fitting that'll fit the Bernzomatic torch head.
thanks I might givr that a try but I found this
for $12.99 at http://www.bcarms.com/product_info.php? ... 3a31001b1a
Is it worth the money, or am I better off with the torch?
for $12.99 at http://www.bcarms.com/product_info.php? ... 3a31001b1a
Is it worth the money, or am I better off with the torch?
if you live in Ohio join the Ohio Spud Gun and BBMG Association at http://www.ohiosga.webs.com