PG255 Locutus
Posted: Sat Feb 12, 2005 8:08 pm
<div align="center">PG255 Locutus
Provided By - <a href="http://www.vochraye.com/spud/">http://w ... m/spud/</a>
"Locutus" was built soon after "Thug '03". Talk about a project getting WAY out of hand...
"Locutus" is a monster. It took over a week to build after the plans were laid out (a long time for a spud launcher!). It was also the first time I have ever used an electronic high voltage ignition system - salvaged from a stun gun. (It was actually pretty simple) All in all, it was a fun launcher to build, and a fun one to launch
The Locutus is currently my crown jewel. It features the following accoutrements:
~255 cubic inch chamber
Dual fire 100,000 volt ignition system
3 step kill switch system
"VisaFire" system (allows safe viewing of ignition jump so you don't have to look in the chamber - my own personal design )
Brush less chamber fan with piggyback switch (allows easy use of the fan without having to put down the gun)
Minigun style grips (wood, aluminum and fiberglass) for easy transporting and firing
All ignition system components have been designed to be water resistant
Ignition system has a patch-in location for remote launching
Interchangeable barrels
New design for the barrel cutter (makes it a LOT easier to cut a spud) </LI>
Provided By - <a href="http://www.vochraye.com/spud/">http://w ... /</a></div>
Provided By - <a href="http://www.vochraye.com/spud/">http://w ... m/spud/</a>
"Locutus" was built soon after "Thug '03". Talk about a project getting WAY out of hand...
"Locutus" is a monster. It took over a week to build after the plans were laid out (a long time for a spud launcher!). It was also the first time I have ever used an electronic high voltage ignition system - salvaged from a stun gun. (It was actually pretty simple) All in all, it was a fun launcher to build, and a fun one to launch
The Locutus is currently my crown jewel. It features the following accoutrements:
~255 cubic inch chamber
Dual fire 100,000 volt ignition system
3 step kill switch system
"VisaFire" system (allows safe viewing of ignition jump so you don't have to look in the chamber - my own personal design )
Brush less chamber fan with piggyback switch (allows easy use of the fan without having to put down the gun)
Minigun style grips (wood, aluminum and fiberglass) for easy transporting and firing
All ignition system components have been designed to be water resistant
Ignition system has a patch-in location for remote launching
Interchangeable barrels
New design for the barrel cutter (makes it a LOT easier to cut a spud) </LI>
Provided By - <a href="http://www.vochraye.com/spud/">http://w ... /</a></div>