Page 1 of 2
Could this be Pneumatic?
Posted: Fri Apr 30, 2010 7:00 am
by Mpeddlesden
During my weekly search online for new smart innovated way's of building cannons (Mainly pneumatic) I found this website which isn't a gun website but its pictures were and i couldn't figure out how this gun would be a Pneumatic Or even if is is one.
Posted: Fri Apr 30, 2010 7:12 am
by jackssmirkingrevenge
looks like it has a pump, so it probably is a pneumatic...
Posted: Fri Apr 30, 2010 7:26 am
by Mpeddlesden
What kind would you reckon it is Qev, Hammer valve, solenoid?
Posted: Fri Apr 30, 2010 7:43 am
by mark.f
It's probably a hammer valve pneumatic gun, judging by the construction.
Posted: Fri Apr 30, 2010 7:51 am
by jackssmirkingrevenge
mark.f wrote:It's probably a hammer valve pneumatic gun.
Yep, I'm guessing the hammer is cocked by that bolt slotted in the stock.
Posted: Fri Apr 30, 2010 8:04 am
by Mpeddlesden
Is there any kind of Blue print (inside image) of how it might be set out inside?
Posted: Fri Apr 30, 2010 8:07 am
by POLAND_SPUD
the hammer is cocked by that bolt slotted in the stock
For me it looks more like a bolt action mechanism than a hammer... notice the hole drilled at the top of the barrel - that's probably the ammo loading port
Posted: Fri Apr 30, 2010 8:14 am
by jackssmirkingrevenge
POLAND_SPUD wrote:For me it looks more like a bolt action mechanism than a hammer... notice the hole drilled at the top of the barrel - that's probably the ammo loading port
The way it looks to me, the bolt action is to reload the projectile while the bolt in the smaller slot in the stock cocks the hammer - that or in spite of its primitive appearance, it has a safety catch
Posted: Fri Apr 30, 2010 4:10 pm
by MrCrowley
This was posted on the forum before. I remember the last picture and someone mentioning somthing about the magnetic ammo holder. Though I can't seem to find the thread.
Posted: Sat May 01, 2010 12:54 am
by jackssmirkingrevenge
I found this website which isn't a gun website but its pictures were and i couldn't figure out how this gun would be a Pneumatic Or even if is is one.
link?
Posted: Sat May 01, 2010 1:01 am
by chinnerz
yep ive seen this one as well, i think i remember the site being in a different language with a big Korean flag at the top?? from memory i think that same guy made a an oaken bow and arrows with glass tips, and also did a write up on how to paint a bike... (its funny what i can remember).
Posted: Sat May 01, 2010 11:45 pm
by Mpeddlesden
Posted: Sun May 02, 2010 12:15 am
by jackssmirkingrevenge
Lol, that actually is a safety catch
the hammer must be reloaded by the bolt then.
And that magnet on the "magazine" turns out to be a
slightly less sophisticated version of this:
Ah well, pretty is as pretty does
chamber seal
Posted: Sun May 02, 2010 4:24 pm
by jean
sorry but this is a thai-gun
no hammer in
this is a chamber-seal
Posted: Sun May 02, 2010 5:05 pm
by POLAND_SPUD
ohh I knew it... I have an airgun (sharp innova) that works using the same principle