Old PVC cannon, still safe?

Boom! The classic potato gun harnesses the combustion of flammable vapor. Show us your combustion spud gun and discuss fuels, ratios, safety, ignition systems, tools, and more.
dippert
Private
Private
Posts: 3
Joined: Tue Jan 03, 2006 12:19 am

Sat May 28, 2011 11:40 am

I built a cannon a few years ago. The chamber is 4" sch40 PVC from McMaster. It's been sitting in my garage at my apartment for the last 2 years. Should I be worried about the PVC becoming brittle? It's been exposed to temps over 100* and below 0* in the garage (Indiana weather). No direct sunlight.
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Sat May 28, 2011 2:47 pm

Sunlight is the killer. Protected in the garage should be fine. If it received any major bumps and bangs, then don't trust it. That is what finally killed my Mouse Musket.
dippert
Private
Private
Posts: 3
Joined: Tue Jan 03, 2006 12:19 am

Sun May 29, 2011 10:14 am

I see. I'm don't remember if it got banged around. I'll build another one just to be on the safe side.

I wonder if it would be worth getting the next gun's chamber and barrel sprayed with line-X. They have some stuff that can keep a wall standing after an explosion.

I might be getting a job at a machine shop in the next few weeks. I may have to learn up on hybrids. Larda has me inspired with that stainless steel beast.
User avatar
jimmy101
Sergeant Major
Sergeant Major
United States of America
Posts: 3199
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 5 times
Been thanked: 17 times
Contact:

Sun May 29, 2011 3:42 pm

What tech said. Besides, you house probably has PVC water lines in it that are much older than the cannon. A PWS may occasionally hit 100 PSI (or much higher in water hammer situations) but you don't hear about decades old PVC failing.

Sunlight will degrade PVC but age alone doesn't do much.
Image
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Sun May 29, 2011 6:48 pm

Dippert, its plastic. Does plastic break up over time? Not that anyone has heard of. I think your fine. But if you want to test it, bury it, then fire it. If its pneumatic, put pressure in until you hit the pressure you want, then done. Leave it for a few hours, and then come back. If it has not blown up, its safe to use.
User avatar
Doctore
Specialist
Specialist
Posts: 139
Joined: Sat Mar 26, 2011 2:18 pm
Location: Danilovgrad
Has thanked: 1 time
Been thanked: 2 times

Sun May 29, 2011 7:16 pm

Well,PVC does not readily degrade when exposed to sunlight (ultraviolet radiation) due to natural UV inhibitors present in the material. Short-term exposure to sunlight, such as during construction, is typically not a problem for PVC pipe. PVC piping may be used in outodoor applications when the piping system is painted with a light-colored water based acrylic or latex paint(Do not use oil based paints) that is chemically compatible with PVC. When painted, the effects of UV exposure are significantly reduced.
User avatar
jimmy101
Sergeant Major
Sergeant Major
United States of America
Posts: 3199
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 5 times
Been thanked: 17 times
Contact:

Mon May 30, 2011 10:24 am

Doctore wrote:Well,PVC does not readily degrade when exposed to sunlight (ultraviolet radiation) due to natural UV inhibitors present in the material. Short-term exposure to sunlight, such as during construction, is typically not a problem for PVC pipe. PVC piping may be used in outodoor applications when the piping system is painted with a light-colored water based acrylic or latex paint(Do not use oil based paints) that is chemically compatible with PVC. When painted, the effects of UV exposure are significantly reduced.
Depends on what "readily" means and whether of not the particular PVC actually has the UV inhibitors . Several years in the sun, unpainted, and the PVC will be severely pitted. Even PVC used for exterior trims will pit in full sun within a few years if unpainted.
Image
Post Reply