VERA: My very favorite gun

Harness the power of precision mixtures of pressurized flammable vapor. Safety first! These are advanced potato guns - not for the beginner.
arisemobility
Private
Private
Posts: 3
Joined: Thu Sep 18, 2014 12:15 pm
Contact:

Thu Sep 18, 2014 12:36 pm

What the! Holy hybrid cannon!
Choose the Best! - Adjustable Beds!
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Sat Nov 15, 2014 9:18 pm

Stay tuned, folks... If everything goes well, on Tuesday I'm going for 1.75 million ft*lbs.
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Sat Nov 15, 2014 9:49 pm

D_Hall wrote:Stay tuned, folks... If everything goes well, on Tuesday I'm going for 1.75 million ft*lbs.
Soooo.....you'll be shouldering it for the shot, correct? Any real man would (snicker snicker). :twisted:
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Tue Nov 18, 2014 9:56 pm

Ooof... 1.75 didn't happen folks. No fault of VERA's, mind you. The attempt for 1.75 was going to be done using an "extra" shot that had already been paid for by a customer in the event their test series concluded early. It didn't so there wasn't an extra asset to go for broke with. Bummer.
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Wed Nov 19, 2014 4:04 pm

So what's the cost per shot?
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Thu Nov 20, 2014 1:39 am

It's on the order of $6k per shot + instrumentation/photography costs. Current customer is running about $10k per shot due to such.
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Thu Nov 20, 2014 1:54 am

Cheaper than I expected. We should have a Spudfiles fundraising campaign :D

I bet we could get reddit to pull the funds together...
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Thu Nov 20, 2014 4:38 pm

Wow that's really more than I expected. I was thinking 3 or 4 hundred.
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Thu Nov 20, 2014 9:04 pm

Today was a good day.

104 pounds.

1220 feet/sec.

That's 2,405,869 ft*lbs, my friends.
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Thu Nov 20, 2014 9:07 pm

jrrdw wrote:Wow that's really more than I expected. I was thinking 3 or 4 hundred.
It takes 3 people about 45 minutes just to open the barrel, load her, and button her back up. Figure $125/hr per person. That's $280 and doesn't even begin to account for initial set up, range expenses, photography, sabot design/construction, etc.

Regardless, even $10k/shot is dirt cheap compared to the alternatives (hint: sled tests generally start about about $75k/shot).
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Thu Nov 20, 2014 9:28 pm

Does it get cheaper the more shots someone orders?
That's 2,405,869 ft*lbs, my friends.
:shock:

What's the projectile weight limit? You've probably mentioned it somewhere before but I've forgotten.
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Thu Nov 20, 2014 9:57 pm

MrCrowley wrote:Does it get cheaper the more shots someone orders?
Absolutely. It costs about $15k just to set up the gun and get things ready to go. You haven't even fired the gun yet. After that..... I don't know exactly what the curve looks like as nobody has asked for a large number of shots, but I imagine in production you could get it down to about $3k/shot.

What's the projectile weight limit? You've probably mentioned it somewhere before but I've forgotten.
There isn't any hard limit, but we've been advertising 500 pounds. Mind you, that's just to cover our bases. The most anyone has asked about is 300 pounds.
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6572
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Fri Nov 21, 2014 5:15 pm

D_Hall wrote:It takes 3 people about 45 minutes just to open the barrel, load her, and button her back up. Figure $125/hr per person. That's $280 and doesn't even begin to account for initial set up, range expenses, photography, sabot design/construction, etc.

Regardless, even $10k/shot is dirt cheap compared to the alternatives (hint: sled tests generally start about about $75k/shot).
It be neet to see the process from start to finish but due to propritary issue's and concerns that's not going to show up on Youtube anytime soon or if at all. :bom:
User avatar
D_Hall
Staff Sergeant 5
Staff Sergeant 5
United States of America
Posts: 1920
Joined: Thu Feb 07, 2008 7:37 pm
Location: SoCal
Has thanked: 7 times
Been thanked: 42 times

Donating Members

Fri Nov 21, 2014 9:29 pm

Hint: 28 bolts. 1.25" in diameter. Impact wrenches are verbotten (chatter is bad for payloads).
Simulation geek (GGDT / HGDT) and designer of Vera.
User avatar
mark.f
Sergeant Major 4
Sergeant Major 4
Eritrea
Posts: 3634
Joined: Sat May 06, 2006 11:18 am
Location: The Big Steezy
Has thanked: 57 times
Been thanked: 57 times
Contact:

Donating Members

Sat Nov 22, 2014 12:59 pm

Sucks to have a cannon so tied up in bureaucracy and labor unions. :D Although that's honestly the only way anyone interested could conceivably afford to build a cannon like this (unless they also snort cocaine off of supermodels rears in their spare time as well).

Sorry to hear it didn't work out... keep us tuned for the next customer cool with you publishing their tests.
Post Reply