SpudFiles

thinking of making a hybrid with this as the chamber...

Also want to use one of those co2 tyre inflators for compressed air, with a decent heavy duty tyre valve.
Gunna try turning my own burst disk valve on the lathe and use thin plastic for the disks.

Never made a hybrid before and im not too sure if the whole thing will work??

Thanks



http://www.winfieldsmegastore.com/resiz ... =350&fit=1

Ok, you really need to read a shit tonne more if you think a co2 tire inflator will add air. Dont use the water bottle it will blow at 3x most probobly, cant be sure because there is no pressure rating.

domino wrote:thinking of making a hybrid with
this as the chamber...

Not a good idea, it will likely rupture even at low mixes.

Also want to use one of those co2 tyre inflators for compressed air, with a decent heavy duty tyre valve.

I don't know if I understood that correctly, you do realise that CO₂ tyre inflators provide... well, CO₂?

That's not going to help with ignition

haha what a fail!!! ye think ill do some homework...

Do you have a source of high pressure air for the inflater valve? It may work if you use air instead of CO2.