Mini ballistic knife

AircannonSweden · Thu Jul 12, 2012 4:34 pm

Hello! EDIT: i got a QEV-cannon under construction,i only need an air-tank

I made this today and it turned out pretty good

Let me know what you think?

//AnS

jackssmirkingrevenge · Fri Jul 13, 2012 2:27 am

Very shanky

just spring powered though? seems a shame not to put a bit of air behind it...

AircannonSweden · Fri Jul 13, 2012 4:33 am

Thank you

i have tried to make a air-powerd ballistic knife but i had problems how i gonna mount the o-rings and the "trigger"...

jackssmirkingrevenge · Fri Jul 13, 2012 5:00 am

If you're using a quick connect as the "trigger", you might as well put a schrader valve in that tee and put some air behind it...

AircannonSweden · Fri Jul 13, 2012 5:11 am

That might work,thank you for the tip

Crna Legija · Fri Jul 13, 2012 7:47 am

AircannonSweden wrote:That might work,thank you for the tip

It will work me and jsr did it. but it gets pretty hard to trigger at 250psi.

AircannonSweden · Fri Jul 13, 2012 8:00 am

I understand that,250 psi is 17 bars(i am from Europe)and that is pretty much preassure