SpudFiles

This is my Pneumatic BB Sniper, it fires various things, such as my favorite, a sharp pop rivet wrapped in tape, or split sinkers wrapped in tape, 2 BB's wrapped in tape, theres lots of things i fire. The Gun is basically a Blow gun, Attached to a 2" Chamber With End caps (all pressure rated) With tire valve popped in, PSI gauge attached, and a 90 degree brass elbow leading away towards the blow gun, and attached to the blow gun is another 90 degree elbow, both attached together using pressure rated pipe and nipples, and other bit and pieces.

The pic is fairly self explanatory, the barrel is approx 7.5mm ID, and fits nicely in the blowgun, some of the barrel is sleeved with 20mm pipe, heated up to slide over the outside of the blowgun. I Run this gun at around 90-120PSI.


The Barrel basically slides in and out of the blow gun for easy re-loading and it slides in 25mm cut off's attached to the chamber, need to glue them in place, but they are just taped for now.

Any Feedback, or constructive criticism is welcome, and also i know blowguns are not the best valves, and don't have very much flow, but still this gun has a lot of power.

Also give credit to Mr.Russ as he made his first and i just made my own version of his.

Just quickly made a bipod to for it, taped it together because I'm out of hot glue at the moment, but thought i would add these pics too. It comes of easy to, when its glued properly it can swivel, turn, tilt and can be detached quickly without have to slide it of.

Vids coming soon, one of me shooting an egg too

Heres a vid of me shooting an egg:

hahha..

scott, scott scott.

Very nice looking. you just need to add a stock, will be comfy as a mutha f**ka

Better not tell them what your main target is haha

Lol i better not *shifty eyes* ALso a question for anyone out there, how could i make a stock for this gun, and how would i attach it? i used a toy AK-47 stock on my inline and liked that very much, might try find another toy gun stock, and attach it, but how would i do that?
Thanks, `~Thursto~'

Nice gun. I had the exact same blowgun, before i tore it apart and made it a bit better.
Here is my modded one, was easy to make


Maybe you can make a similar one and integrate it into a stock. Except it would have to exhaust through the pvc barrel instead of into the air. It would be a bit of work but it would be very cool.


You wouldn't happen to be an Ausie?

lol - obviously, he is an aussie. if he has the same blowgun as you.. and the same one as me

Of course im an aussie and proud to be also! Btw nice gun Marco321 is that a pneumatic marble cannon? Andyou alos have the same Pressure gauge as me, Comes with the blowgun :D:) Also where do you get those scopes from? and how much?

Lol
AUSIE AUSIE OI OI OI

Thanks, yeah its a pneumatic marble gun, but she is in pieces now
Yeah she was a good blowgun. The scope was from ebay, around $40 including shipping, its from china, but form ebay.com.au. Its a good quality brand and a good quality scope. Chaos and Experiment u2 have the same one as me, they recommended it to me

EDIT: Personally i would recommend iron sights. But they don't look as cool as a scope, but they are cheaper and more practical on a spudgun.

they dont just sell those blowguns in australia, they also sell them here in las vegas for $14.95, with a shradder valve filler thinggy ob the front.

nice design, clean and tight. what is the air chamber size 3"? and do u have to pump it up after every shot?
btw i always like the guns & vids you and Mr Russ post.
_______________________
http://www.freewebs.com/spuddin

haha the vids are okay lol.

His chamber size is 2", just like mine.


You have to pump up after every shot, you can get about 2 powerful shots out of a tank. if you do one powerful shot you only have to pump up a few times instead of filling the whole chamber.

the scopes off ebay me marco and casey all have one

experament-u2 wrote:the scopes off ebay me marco and casey all have one

Lol yeah marco told me, talking to a bloke at school and his uncle owns a gun shop, so he said he'll se if he can get me a cheap scope, but i doubt he'll be able to.

yer thats pretty kool but a stock would make it look wikkid 8)

Marco321 wrote:Lol
AUSIE AUSIE OI OI OI

You forgot one of the "AUSSIE"s.

BTW, nice gun man, Damage pics would be awesome.

Happy SPuddin'

Redcoat wrote:

Marco321 wrote:Lol
AUSIE AUSIE OI OI OI

You forgot one of the "AUSSIE"s.

BTW, nice gun man, Damage pics would be awesome.

Happy SPuddin'

Haha yeah, lol...
Thanks, but she is converted from a marble gun to a 8mm gun, and i killed the sprinkler and stole the blowgun for my new coaxial. i have to buy a new valve and blowgun.

AUSSIE AUSSIE AUSIE OI OI OI