Page 1 of 1
Mini ballistic knife
Posted: Thu Jul 12, 2012 4:34 pm
by AircannonSweden
Hello!
EDIT: i got a QEV-cannon under construction,i only need an air-tank
I made this today and it turned out pretty good
Let me know what you think?
//AnS
Posted: Fri Jul 13, 2012 2:27 am
by jackssmirkingrevenge
Very
shanky 
just spring powered though? seems a shame not to put a bit of air behind it...
Posted: Fri Jul 13, 2012 4:33 am
by AircannonSweden
Thank you
i have tried to make a air-powerd ballistic knife but i had problems how i gonna mount the o-rings and the "trigger"...
Posted: Fri Jul 13, 2012 5:00 am
by jackssmirkingrevenge
If you're using a quick connect as the "trigger", you might as well put a schrader valve in that tee and put some air behind it...
Posted: Fri Jul 13, 2012 5:11 am
by AircannonSweden
That might work,thank you for the tip
Posted: Fri Jul 13, 2012 7:47 am
by Crna Legija
AircannonSweden wrote:That might work,thank you for the tip
It will work me and jsr did it. but it gets pretty hard to trigger at 250psi.
Posted: Fri Jul 13, 2012 8:00 am
by AircannonSweden
I understand that,250 psi is 17 bars(i am from Europe)and that is pretty much preassure