SpudFiles

Hi guys...
This is our first simple BB 6mm cannon or PVC airsoft gun.
This great forum has influenced us to make an airsoft gun out of pvc pipe.

Materials list:
1 PET bottle --> air chamber & butt stock
1 PVC Valve Socket (male) --> air chamber & butt stock
1 PVC Tee 1/2 inch --> pistol grip
1 PVC Cap 1/2 inch --> pistol grip
1 MTB Tire valve--> air intake
1 Plastic ball valve --> trigger
1 PVC Tee PVC 1/2 inch --> breech / loading slot
1 Ricng Clamp --> breech open & lock handle
1 Alluminum Pipe --> barrel
1 Airsoft Inner Barrel --> barrel
1 PVC Pipe 1/2 inch --> shroud
1 PVC Socket 1/2 inch --> muzzle accesories
1 PVC solvent cement

Before using 6mm airsoft inner barrel, we use RCA Jack (audio-video) and AAA battery as projectiles, pumped 40-60 psi using bike pump.


This is simple video when we test it:
[youtube][/youtube]

Thanks for all inspiration and idea from every members of this great forum

http://PVCairsoftgun.blogspot.com

Nicely put together, shame about the ball valve. Think about getting a quick exhaust valve, very cheap from eBay and can allow for semi auto:

http://www.spudfiles.com/forums/semi-au ... 23626.html

Thanks for feedback and recommendation about QEV @jackssmirkingrevenge. This is our first spud project, perform the basic function and we want the design easy enough to be duplicated. Again, QEV is our dream for next project, but we have to owned proper air supply first