Page 1 of 3

Goat's Gun

Posted: Thu Apr 26, 2007 9:17 pm
by goathunter
This baby has been my pride and joy for the past couple of months.I built it for use at paintball scenario games.I tank hunt so this is my prime weapon.So far I have been very succesful with it, 20 confirmed tank kills in the last game.Not to shabby for the first time out.Hope ya'll enjoy and VOTE FOR GOAT :D

Specs:

Overall length:40 1/2"
Air chamber:2" sch.40 18" long
Barrel:1 1/2" sch.40 18 1/2"
Valve: Standard sprinkler
Action:break open single shot
Operating pressure:80-145 psi.
Detachable stock

And a video of me loading in 5 sec.(sorry vid quality VERY BAD)
Image[/url]

Me firing and filling
http://s167.photobucket.com/albums/u148 ... V00241.flv

Posted: Tue May 01, 2007 6:53 pm
by Boomer_
This really shouldn't be in bb/airsoft/paintball, should it? I would think more like pneumatic or something?

Posted: Tue May 01, 2007 7:15 pm
by surfbum
Boomer_ wrote:This really shouldn't be in bb/airsoft/paintball, should it? I would think more like pneumatic or something?
this is a pneumatic

Posted: Tue May 01, 2007 7:32 pm
by goathunter
@ Boomer and surfbum,It shoots paintballs and was designed specifically for paintball.PCGuy didn't have a problem with it.

I know folks told me that I should put a sight on.Well, I did. So here is the Goat Gun with new sight rail.I found the rail in some old parts that came with my phantom.I drilled the barrel and screwed the sight rail down.

Posted: Tue May 01, 2007 7:58 pm
by chaos
nice as i like the sight. how accurate is it at say 30m?

edit: oh and can we please get some vids of this thing in action... pwease pwease pweas???

Posted: Tue May 01, 2007 8:18 pm
by goathunter
Yep, I'll get vids tommorrow.It's a little dark out now.My problem is that the camera may not pick up the football.I'll get vid of me filling and firing from my paintball setup.
The sight is horribly innacurate as i haven't sighted it in yet(batteries are dead,have to find replacements) :D
I doubt if it will compensate for anything over 30m(75 ft?) The football begins to seriously lob at that range.

Posted: Tue May 01, 2007 9:28 pm
by Boomer_
I wasn't questioning, I was just saying, it didn't cross my mind that it was built for paintballs when I saw that nerf football. That's pretty sweet. Good job on that, especially the break barrel breech loading.

Posted: Tue May 01, 2007 9:32 pm
by goathunter
Yeah,I used footballs since they are easy to see in the pics.I shoot more paintballs out of it than footballs.You only get a shot or 2 at a tank an hour,So that leaves a lot of time to make use of the shotshells.After I wrote I thought I may have responded like I was scolding you and surfbum.Sorry if i did, it was not my intention.

Posted: Thu May 03, 2007 10:52 pm
by goathunter
All righty, a little late but I now have a video of me firing and filling with my paintball setup.

Posted: Fri May 04, 2007 12:41 am
by SpudBlaster15
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

Posted: Fri May 04, 2007 11:51 am
by BriarPatch
Goat,
Awesome cannon. Do you by any chance have a set of plans for it? I would like to make one for paintball use, but I'm not that great of a designer. If plans are available, please let me know. I would need a spec sheet and material list as well. Many thanks.
BriarPatch

Posted: Fri May 04, 2007 8:24 pm
by MrCrowley
Thta is a really really nice gun, love the loading system on it. Great job.

Posted: Sun May 06, 2007 8:13 pm
by goathunter
Sorry Briar, I winged this gun.It's not that hard to figure out(KISS principle in action).The only thing worth noting is the female adapter were the stock screws in. The connector pipe(in between the adapter and T) is filled with JB weld to stop the stock from filling with air. That and the action is made out of 1/4" marine plywood.See if you can figure it out from the pics ,anything else just ask.

Goat

Posted: Mon May 07, 2007 3:29 am
by bboymatty
this is a great design, i especially love the break breech you use. very original. Looks like a great gun to use in the game!

Posted: Tue May 08, 2007 12:46 pm
by goathunter
Well I thought it was original until I found out Brian the Brain had though up the same thing.Oh well I built mine on a spudgun first :) And it is great to use on the field.I Played with it this last weekend.Worked well,although I only used it for base defense.The shotgun loads are great. Nothing like a 1' spread(24 rd.) at 75' to make the competition wet themselves.