dumb question, but i need help
They have em at HD, you just need to get the threaded reducing bushings. I.E., you need a coupler, reducing bushing and then a threaded to your pipe size adaptor... It costs a bit more now, but when you're not paying for hospital fees, it helps. Also, afaik, there are no pressure rated screw in caps @ HD, so you will have to do with the DWV as your vent port...(an idea though, would to be to use a ball valve as your vent port instead of the cap)
There is no such thing as a "screw in cap", period. By definition, a cap goes over a piece of pipe, so there is nothing to screw into. There is, however, a such thing as a pressure rated screw in plug, but they don't look anything like the cleanout cap that you have on it.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
The pressure rated ones are hex head, the DWV ones have a small square head in the middle.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
Modderxtrordanare
- Corporal 2
- Posts: 686
- Joined: Mon Nov 20, 2006 1:22 pm
- Location: Texas
A lot more threads too. 
Spudding since '05. Proud waster of plumbing and plumbing accessories.
-Wiki
-How-To: Modding a Sprinkler Valve
-Wiki
-How-To: Modding a Sprinkler Valve
A lot of you newer guys seem to just accept that DWV fittings aren't safe, and I'm not completely sure if you know why. It may just be me, but most of you just say they're unsafe with no explanation.
Yes, the fittings are used for non-pressure systems, but they are the same pipe, and the same thickness (provided they're Sch 40). The main danger is that they are more prone to blowing off, because the socket depth is extremely short. A 2" NSF-pw (Sch 40) has a socket depth of 2-2 1/2." A 2" Sch 40 NSF-dwv coupler has a socket dpth of about 3/4" or less.
Yes, the fittings are used for non-pressure systems, but they are the same pipe, and the same thickness (provided they're Sch 40). The main danger is that they are more prone to blowing off, because the socket depth is extremely short. A 2" NSF-pw (Sch 40) has a socket depth of 2-2 1/2." A 2" Sch 40 NSF-dwv coupler has a socket dpth of about 3/4" or less.
-
jimmy101
- Sergeant Major
- Posts: 3199
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 17 times
- Contact:
This is not true. Many pipes and fitting will say both NSF-DWV (drain waste vent) and NSF-PW (pressurized water). So, the presence of NSF-DWV has no real meaning. The only thing that matters is that the pipe or fitting says NSF-PW or that it has a suitable pressure rating limit printed or embossed on it.potatoflinger wrote:If they say nsf-dwv on them, they aren't pressure rated.
-
clide
- Corporal 3
- Posts: 784
- Joined: Sun Mar 06, 2005 3:06 am
- Location: Oklahoma, USA
- Been thanked: 1 time
While it is true that the could have both, I've never seen a fitting with both or met anyone who could provide me with a picture of a fitting with both. Pipe usually does have both though. Also PW stands for potable water.jimmy101 wrote:This is not true. Many pipes and fitting will say both NSF-DWV (drain waste vent) and NSF-PW (pressurized water). So, the presence of NSF-DWV has no real meaning. The only thing that matters is that the pipe or fitting says NSF-PW or that it has a suitable pressure rating limit printed or embossed on it.potatoflinger wrote:If they say nsf-dwv on them, they aren't pressure rated.
