GGDT/HGDT Request Thread

A place for general potato gun questions and discussions.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Mon Aug 29, 2011 5:42 am

nathanhd123 wrote:I have just found this page on my QEV. Can anyone make sense of it?
There isn't really any relevant data on that page. What are you trying to do though, calculate the performance of an existing launcher or predict the performance of a future design?
I am trying to get some data to put into GGDT as I do not have a spanner big enough to open my QEV.
No vice in the garage to hold the body?
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
nathanhd123
Private 4
Private 4
Posts: 95
Joined: Sat Jan 15, 2011 12:36 pm
Location: United Kingdom

Mon Aug 29, 2011 6:46 am

I am trying to calculate the performance of an existing launcher. Unfortunately I don't have a vice - although someone is giving me an old one soon. Do you have some generic data for a 3/4" QEV?
<a href="http://www.danasoft.com"><img src="http://www.danasoft.com/vipersig.jpg" border="0"></a><p><div>Sign by Danasoft - <a href="http://www.danasoft.com">Get Your Sign</a></p></div>
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Mon Aug 29, 2011 6:54 am

nathanhd123 wrote:Do you have some generic data for a 3/4" QEV?
This should be a reasonable approximation:

valve type - generic
# of valves - 1
Flow Coef. - 5
Seat Diam - 0.75 in
Open Time - 20 ms
Dwell Time - 999 ms
Dead Vol - 1 in3

For some hard data, using a microphone and an audio program that can be downloaded for free, adecent homemade chronograph can be made.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
nathanhd123
Private 4
Private 4
Posts: 95
Joined: Sat Jan 15, 2011 12:36 pm
Location: United Kingdom

Mon Aug 29, 2011 7:17 am

How do you go about calculating the projectile friction?
<a href="http://www.danasoft.com"><img src="http://www.danasoft.com/vipersig.jpg" border="0"></a><p><div>Sign by Danasoft - <a href="http://www.danasoft.com">Get Your Sign</a></p></div>
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Mon Aug 29, 2011 7:19 am

nathanhd123 wrote:How do you go about calculating the projectile friction?
http://www.thehalls-in-bfe.com/GGDT/usage_input.html
GGDT wrote:Projectile -> Friction
Most projectiles will experience some friction in the barrel. As the reader may imagine, this variable defines frictional forces in the simulation. However, it should be noted that this value is NOT the coefficient of friction that many with physics training may expect to see. Such data can be difficult or impossible to obtain. Instead, GGDT uses a more practical approach to friction; that of equivelent pressure. Place your projectile in your barrel and blow begin to pressurize the breech. At what pressure does the projectile first begin to move at? Whatever that pressure is, put it in the blank! (Note: Human lungs can produce about 2 psi. If you can use the barrel like a blowgun and get the projectile to move....)
In other words, just leave it as is. Shouldn't make much difference.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Tue Aug 30, 2011 1:55 am

GGDT instructions wrote:At what pressure does the projectile first begin to move at? Whatever that pressure is, put it in the blank!
This raises an interesting question, maybe D_Hall can weigh in on the matter - does GGDT assume this friction only until the projectile starts to move, or along the whole time the projectile is in the barrel? If it's the former case, it could be used to simulate the addition of a detent to the system...
hectmarr wrote:You have to make many weapons, because this field is long and short life
Atattack
Specialist
Specialist
Posts: 123
Joined: Fri Aug 19, 2011 8:33 am

Wed Aug 31, 2011 5:46 pm

I am designing a water balloon launcher, and am trying to calculate the optimum C:B Ratio for a gun with 72" length. I am using a 4" aluminum pipe for chamber and a 3" aluminum pipe for barrel. I am using a 1.5" solenoid valve with a CV of 29.

I am just surprised by the c:b ratio recommended. I am not sure if I entered info correctly, especially in the valve section. Any help is appreciated. Thanks

Working on getting it pasted in forum, thought I did but can't get it to upload
Attachments
pic1.jpg
sco77
Private 2
Private 2
Posts: 34
Joined: Thu Jul 14, 2011 3:54 pm

Wed Aug 31, 2011 6:03 pm

I hate to hijack thread but I also hate to create duplicate threads...

Why does GGDT give low FPS result with a faster valve open time? I was thinking maybe it meant how long the valve is open, but that's cant be the case either since setting it high also kills FPS.
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Wed Aug 31, 2011 6:23 pm

The problem with the low FPS is the dwell time. Try again with a dwell time of at least 20ms. It is simulating a hammer valve which opens for 2.5ms and is closed again due to no dwell time. The air in the barrel continues to expand and the power rapidly drops off early.
Atattack
Specialist
Specialist
Posts: 123
Joined: Fri Aug 19, 2011 8:33 am

Wed Aug 31, 2011 6:27 pm

I ran a calculation using a burst disk of 1.5" and a CV of 29 and got a totally different suggestion. Said to use a 21" 264cc Chamber and a 51" 360cc barrel. Totally confused.
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Wed Aug 31, 2011 7:08 pm

Dwell time on a burst disk is > one second. Once open, it remains open. :D
Atattack
Specialist
Specialist
Posts: 123
Joined: Fri Aug 19, 2011 8:33 am

Wed Aug 31, 2011 7:14 pm

So when I change the dwell time, it says "ms" for the units of measure, guessing milliseconds. So wouldn't a solenoid valve remain open until the gas vents the chamber so wouldn't it be the same as a burst disk for this?
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Wed Aug 31, 2011 8:44 pm

@Atattack,

Your topic has been merged with the GGDT/HGDT Request Thread. Please continue your discussion here.

Thanks :)
Atattack
Specialist
Specialist
Posts: 123
Joined: Fri Aug 19, 2011 8:33 am

Wed Aug 31, 2011 9:21 pm

After running some calculations on GGDT it calculated that the optimum barrel configuration for a gun with a 3" barrel and chamber would be a 24" chamber and a 48" barrel @ 125psi. I thought that the general consensus was the opposite for pneumatic guns.
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Wed Aug 31, 2011 9:25 pm

GGDT doesn't optimize the lengths by performance. Rather by efficiency. At a certain point, a larger chamber starts to give back not as much gain, and this is where GGDT cuts it off. Making the chamber larger, however, will still give you much better performance.

This should have gone in the GGDT thread I think.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
Post Reply