Caselman air machinegun

A place for general potato gun questions and discussions.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sat Jul 05, 2014 7:29 am

Solar wrote:The FBI has been going around to Hobby stores trying to collect info on customers who have purchased drones and/or have such skills as to create what you are speaking of. They obviously are surprised it hasn't happened yet either.
For all we know it already happened and it was kept quiet.
But what about the Caselman? Is anyone building one on here? Has anyone? I read a couple of years ago that Mr. Caselman had partnered with someone to start producing them.
They have definitely been built, but I don't know of anyone on this forum who went ahead and followed the plans in detail.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Sat Jul 05, 2014 9:58 am

I'm pretty sure that with a bit of imagination and a modest budget, a private individual could land a payload on a GPS coordinate from many kilometres away, something which is pretty scary and I am surprised there hasn't been a major incident of this type reported.
Yup amateur drone community has been very lucky that none of it happened so far. The worst part is that you don't even need energetic materials for it.
Children are the future

unless we stop them now
sagthegreat
Specialist 3
Specialist 3
Posts: 343
Joined: Thu Feb 16, 2012 5:23 pm
Location: Leesburg
Contact:

Sun Jul 06, 2014 8:15 pm

POLAND_SPUD wrote:
I'm pretty sure that with a bit of imagination and a modest budget, a private individual could land a payload on a GPS coordinate from many kilometres away, something which is pretty scary and I am surprised there hasn't been a major incident of this type reported.
Yup amateur drone community has been very lucky that none of it happened so far. The worst part is that you don't even need energetic materials for it.
ikr, a bird sized glider with a thermal camera launched from a weather ballon 80k feet with a preprogramed flight over area 51 would be awesome. Also make the video feed be downlinked live so even if they shoot it down, nothing is lost
User avatar
dart guy
Specialist 3
Specialist 3
Posts: 394
Joined: Mon May 13, 2013 7:54 pm
Location: not telling you

Mon Oct 27, 2014 5:46 pm

Ok this is cool, but I can't see the pictures because I'm stuck on an iPad, anyone mind posting a pic?
when life gives you lemons... make root beer and leave the world wondering how you did that :D
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sat Feb 09, 2019 8:03 am

I wonder how a Caselman-style blowback would work with a balanced hammer valve, with a much weaker spring needed to knock the valve open you could presumably achieve a repeating cycle with much less pressure than the 3000 psi recommended for the original.

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Thu Feb 28, 2019 9:23 am

Image

Above concept drawn to scale with a Crosman 2240 type grip and trigger group, and a 13ci HPA bottle (click to embiggen)
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Thu Feb 28, 2019 11:39 am

jackssmirkingrevenge wrote:I wonder how a Caselman-style blowback would work with a balanced hammer valve, with a much weaker spring needed to knock the valve open you could presumably achieve a repeating cycle with much less pressure than the 3000 psi recommended for the original.

Image
Does the blocking element of the bb`s have a spring? or is it with an air chamber?
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Thu Feb 28, 2019 12:00 pm

hectmarr wrote:Does the blocking element of the bb`s have a spring? or is it with an air chamber?
Yes there's a spring, you can see it in the last drawing I posted.

Edit: build started, turns out my Crosman grip dimensions were a bit off on the original drawing so here it is redone to more accurate scale:

Image
Last edited by jackssmirkingrevenge on Sun Mar 03, 2019 7:34 am, edited 1 time in total.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 37 times
Been thanked: 20 times

Fri Mar 01, 2019 9:17 pm

I'm very much looking forward to this!

Select fire, full, or semi? I've been working on disconnector designs and come up with a few things but open bolt full auto is the ultimate in simplicity.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Sun Mar 03, 2019 8:52 am

Anatine Duo wrote:Select fire, full, or semi? I've been working on disconnector designs and come up with a few things but open bolt full auto is the ultimate in simplicity.
The Crosman trigger group as-is only allows for open bolt full auto, however an easy way to have semi-automatic is to use a paintball grip, most basic designs having a resetting sear:

Image

The next project after this would indeed be a semi-automatic in a larger caliber.

Here's what I have so far in the meantime:

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Mon Mar 04, 2019 9:19 am

Some progress this morning, plenum chamber components anchored in place and breech attachment made. Now to make the poppet and see if it holds air and what sort of hammer is going to be needed.

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1064
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 273 times
Been thanked: 276 times
Contact:

Mon Mar 04, 2019 1:18 pm

Wow! Impeccable work :) Why is the bronze pipe used to shoot normally used? Or is it exclusively built for that weapon?
keks2033
Private 4
Private 4
Russia
Posts: 94
Joined: Mon Feb 08, 2016 2:37 am
Has thanked: 1 time
Been thanked: 5 times

Mon Mar 04, 2019 1:20 pm

Jack, this scheme will not be more effective? The piston in the bypass is smaller than the volume in the drummer.
Attachments
полуавтомат через перепуск.jpg
полуавтомат через перепуск.jpg (21.2 KiB) Viewed 23986 times
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Tue Mar 05, 2019 7:52 am

keks2033 wrote:Jack, this scheme will not be more effective? The piston in the bypass is smaller than the volume in the drummer.
Interesting! My plan is to test it with the barrel bolt only first to see if I can get it to work like that, if not a secondary pistol will be added.
Why is the bronze pipe used to shoot normally used? Or is it exclusively built for that weapon?
Do you mean the barrel? It's a KS part, they have a huge choice: http://www.ksmetals.com/26.html

Poppet valve done in the meantime and after tweaking the valve seat everything sealed well at 850 psi:

Image

If you look closely at the valve stem there is a groove that connects to a hole in the center of the body, in order to avoid the valve being slammed open by the chamber pressure as soon as it cracks and dumping the chamber.

That was an excuse to have a bit of fun using a brass bar dropped by gravity as a hammer and the barrel tube held in the breech attachment:

[youtube][/youtube]

The #4 birdshot easily went through the bottom of a soup tin at close range which is about the performance I wanted for a plinker
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 343 times

Donating Members

Wed Mar 06, 2019 9:27 am

Wasted quite a lot of time yesterday trying to sort out an inconsistent seal with the poppet valve which mostly boiled down to insufficient valve spring preload, but that seems to be largely sorted now.

I made a quick PVC hammer with a brass insert and it works really well, even the weakest spring I could find it seems to be letting out too much air:

[youtube][/youtube]

I managed to chrony some lead shot, velocities ranged between 630 and 570 feet per second, given the variation in size this wide range is not surprising.

From what I've seen so far, I'm very optimistic that there will be enough power to cycle the action without a secondary piston. Now to make a proper hammer and breech.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply