I know nothing about PVC Fittings...
Problem: Need to take a 2" SHC-40 PVC Pipe, and bring it down to a 1" for a sprinkler valve.
Could I use a Bushing?
Like This:
http://www.atozsupply.com/2_x_1_PVC_Bus ... 00$7B$86$B
This:
http://www.plumbingsupply.com/pvc.html#bush
Or This:
http://www.plumbersurplus.com/Prod/PVC- ... 54/Cat/754
These are all the same right?
Please tell me what to use to bring it from 2" to 1"!
Fittings Help
-
- Private 2
- Posts: 26
- Joined: Sat May 31, 2008 7:18 pm
http://www.plumbingsupply.com/pvc.html#bush
Slip Threaded Bushings - Spigot x Fips - #438
2" Spigot x 1" Fips
? That work? Link me!
Thank You for the Help!!!
Slip Threaded Bushings - Spigot x Fips - #438
2" Spigot x 1" Fips
? That work? Link me!
Thank You for the Help!!!
-
- Corporal 3
- Posts: 734
- Joined: Mon Jun 23, 2008 3:20 pm
- Location: Texas
He doesn't need a threaded adapter if he gets a valve with solvent slots. That's what I got for my CA1.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon
Current Project: Bolt action rifle (25x140mm + 1in shot)
The best way to learn all about fittings is just to dive into the plumbing isle at your local hardware. Yeah, those bushings will work, but I would strongly recommend just going out to Lowes or HD and getting your hands on the stuff.
searching for a modern day savior from another place,inclined toward charity,everyone's begging for an answer,without regard to validity,the searching never ends,it goes on and on for eternity
-Bad religion
-Bad religion
-
- Private 2
- Posts: 26
- Joined: Sat May 31, 2008 7:18 pm
Yea, I went to Lowes and Home Depot, and both of them were lacking inventory, HD was terrible... (small one here)
Anyways I ordered the bushings online! Thanks For the help all!
Anyways I ordered the bushings online! Thanks For the help all!