Page 1 of 1
Sprinkler Valve Won't open
Posted: Tue Jun 13, 2006 8:20 pm
by Trumpetrhapsody
I followed the PVC Balistics guide for building the sprinker valve cannon, built it all right, but the sprinkler valve won't open. We're getting 27 volts just fine, but the valve won't open. I noticed that on the valve, it says 24 volts AC 60hz, and batteries are most definately DC. How have you guys gotten this to work?
Here is the page I based mine on:
http://members.aol.com/sph911/spud/electronic.html
Posted: Tue Jun 13, 2006 8:39 pm
by benstern
Double check your connection!
Posted: Tue Jun 13, 2006 8:56 pm
by Atlantis
Is it facing the right way? There should be an arrow on it.
Posted: Tue Jun 13, 2006 9:26 pm
by Trumpetrhapsody
Yeah everything is hooked up right, and the arrows are pointing the right way. The valve just won't open. The valve being AC doesn't matter?
Posted: Tue Jun 13, 2006 9:33 pm
by frogy
What kind of valve is it? If it's pneumatically modifiable I would do that, it will save you trouble and it's a lot better than electrical
If it's doesn't work because it needs AC, screw the electrical thing, it's way cheaper to make it pneumatic ( about $10 ) than to buy an inverter.
Posted: Sun Oct 08, 2006 3:03 am
by frankrede
Does the solenoid make a noise when the voltage is applied?
Are your batteries charged?
Maybe your valve is faulty?
Take your battery to a hardware store and try the battery on one of there valves.
Do you have trouble sleeping at night?
Posted: Sun Oct 08, 2006 3:23 am
by tntlly
i agree with froggy, just go pneumatic. with my first gun i did the electric thing and it was okay but then i accidentally left it on and the batteries died (i know i should have made a momentary on/off button but all i had was one toggle) but still, i started using modified sprinklers and its much better
Posted: Sun Oct 08, 2006 11:55 am
by frankrede
I had a nice control box before I went pneumatic.
It was all in a prokect enclosure.
It had a switch and a momentary switch.
When the switch was on a Red led switch came on to say that it was armed.
And I could fire it like a rocked launcher.
WHich is hard to do now.
Posted: Mon Oct 09, 2006 12:26 am
by BC Pneumatics
Congratulations Frankrede!
You have received the first annual Blatant Bragging Award!
Posted: Mon Oct 09, 2006 12:31 am
by frankrede
I just wanted to tell evreyone.
After all whats the point of having nice things if know one knows about it.
Posted: Mon Oct 09, 2006 12:31 am
by iamthewalrus
frankrede, plz...PLZ..explain to me why you 1. didnt answer the question at all, and 2. posted about u triumph over a combustion item inside a thred for pnermatic help?? and i support BC's post, congrats on ur award...