foldable bipod
Posted: Fri Oct 20, 2006 8:46 am
does anyone here know how o make a foldable bipod?
Ive been looking for a while now
thxs
Ive been looking for a while now
thxs
Page 1 of 1
Posted: Fri Oct 20, 2006 9:19 am
i dont kow how to make one but if u go to a camera shop u can buy somthing called a minni tripod its a relly small tripod and u just need to remove one leg and attach it and u have a pefect bipod
Posted: Fri Oct 20, 2006 11:04 am
Two pieces of 1by1 cut to desired length connected by a hinge to form a "V"
Posted: Fri Oct 20, 2006 12:03 pm
I have one made a while ago. I'll take some pics this evening and post them here.
Posted: Fri Oct 20, 2006 12:37 pm
you could make somthing like this if you have access to a bansaw or know someone who does
just JB weld that SOB to the bottom of the barel or bracket it on with metal so you can take it off
or go to walmart and see if they sell the clip on kind like this:
just JB weld that SOB to the bottom of the barel or bracket it on with metal so you can take it off
or go to walmart and see if they sell the clip on kind like this:
Posted: Fri Oct 20, 2006 12:58 pm
Take two boards and bolt them together to form an "X", or just tie them together.
say i'm new here how do ya post pics?
say i'm new here how do ya post pics?
Posted: Fri Oct 20, 2006 1:02 pm
highlight the URL of the pic copy and paste it into the message body, then highlight that and press the button that says Img, then preview to make shure it works.
to use your own pics, sign up at photobucket.com and upload your pictures there and use the provided URL from photobucket.
to use your own pics, sign up at photobucket.com and upload your pictures there and use the provided URL from photobucket.
Posted: Fri Oct 20, 2006 1:10 pm
Two questions:
One, is photo bucket free
And two, what is the attachment thing, will that work?
Oh and sorry for getting of topic
One, is photo bucket free
And two, what is the attachment thing, will that work?
Oh and sorry for getting of topic
Posted: Fri Oct 20, 2006 1:16 pm
Yes, photobucket is free, and I don't know about the attachment thing I've never used it, I'm new here too, I just know about the Img thing from other forums I'm involved in.
Posted: Sat Oct 21, 2006 7:00 pm
Well, I point out that a typicaly spudgun is only accurate to about 40 MOA - and that's with a riffled barrel. (shooting potatoes)
If you can't aproch that type of accuracy from prone... that's just sad. (I can do about 10 MOA from standing. (pellet rifle))
Addmittedly, these measurments are culmitive - but this would be alot of work to shave off maybe 5-10% of your total inaccuracies.
That said, if you are just looking for "cool factor" - you could attempt to make a replica of the folding meathod used by a real bipod. This is a bit difficult... but should be possible without a machine shop.
Other than that, <a href="http://www.varmintal.com/abifu.htm">varmint al</a> has something he calls a "bi-fir-pod". One could easily make an adaptation for prone use by reducing the leg dimensions.
If you can't aproch that type of accuracy from prone... that's just sad. (I can do about 10 MOA from standing. (pellet rifle))
Addmittedly, these measurments are culmitive - but this would be alot of work to shave off maybe 5-10% of your total inaccuracies.
That said, if you are just looking for "cool factor" - you could attempt to make a replica of the folding meathod used by a real bipod. This is a bit difficult... but should be possible without a machine shop.
Other than that, <a href="http://www.varmintal.com/abifu.htm">varmint al</a> has something he calls a "bi-fir-pod". One could easily make an adaptation for prone use by reducing the leg dimensions.
Posted: Mon Oct 23, 2006 3:02 am
im going to try and make something like this
