SpudFiles

***UPDATE***

going to look like a beaut when its done with a satin black paint job. going to have 6 barrels, it will be longer later.

but still a whole list of stuff to do.
_____________________________

the first pic

the gallery
http://gatlingshooter.mypicgallery.com/

the gatling gun, i hope the pic shouldl explain how it works, a spring loaded firing pin will trave around the outer pipe, and is being pulled slowly away from the spring, when it reaches the 'drop', i will spring back and push a ball out of the barrel.


i had to modify the springs to this


its a cut-away

still not done, but got all the parts except the springs

thats up to date for ya, still not done

Pretty creative. Good work, cant wait to see it completed. Although I dont know if that much spring lengh will give you much power. It will have to be a pretty powerful spring.

i dont care about power, 5 meters range would make me happy, its the rof i'm after, i wanna rain someone with paintballs, and my paintballs break so easily. other ammo is gum balls and marbles

Looking good.... I will try to get some renders of my 3D gattling gun up, so we can exchange some ideas!

are they in any way similar? cuz i had the idea a long time ago and i dont like copying others

also i leaned a little from here http://www.coz-fx.com/animations.htm
and http://people.howstuffworks.com/machine-gun4.htm

update:
check this out

wikid how far allong are you on it also how do you plan to make it work

also what do you estimate the rate of fire will be

i had an idea of making one that fired glow sticks it would of been pretty cool to see if i had the money to build ita stream of lit glow stick

how do plan to fire it a pintel mount like on a black hawk or like in predditor

my friend made a gatling gun for 1 1/2 inch spuds. it only had 3 barrels but it was pretty cool. he broke one of those spinning bar chairs and used it to rotate his guns and he had our weed wacker to turn it automaticaly
he put this little / looking piece of wood to push in the BBQ starter on the back of all 3 wen it turned. ill try to go get some pictures of it but i have no idea what he did with it. and i need my weed wacker back

i finnaly got some good drill bits, i can start working on this again

Sorry for kicking up a dead topic but, I would like to know what tool you used to cut the spiral shape into the bolt retractor. I may have figured out how to use gatling technology in a pneumatic cannon.

use the spiral to open a valve right?

I don't think this is pneumatic or cumbustion. It's just powered by springs. As for my question, I just used a drill to perferate the pipe then cut the rest with a saw.

i used a dremel.
i gave up on this... the pins keeps slipping... i might try again, making it longer will allow me to hold them down

Right now I'm working on a gatling-like gun. It only has one 1.5" barrel and wrapped around that barrel is the spiral groove. The spare chunk that was cut off the spiral of 2" is attached to the bolt and the other chunk is attached to the stationary chamber and clip tee. The gatling bolt will be motorized by an electric screwdriver.

P.S. Multiple barrels only cause more chances to jam.

Check it out guys http://www.spudfiles.com/forums/viewtop ... 500&#11500
this is my idea.

off topic means nothing to do with spud gun bb machine gun nothing that propels something out of a cannon understand this OFF TOPIC it clearly says nothinf to do with spud guns post in spud gun related it says post about bb maching guns in there doesnt it