cleaning out the combustion chamber
-
- Private 2
- Posts: 28
- Joined: Fri Sep 07, 2007 7:02 pm
what is the best way to clean the crap out of a combustion chamber?
- Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
I would go with WD40 and towels on a stick if you have a fan in it. Water generally won't hurt a brushless fan (hell, I've run them underwater), but WD40 will probably dissolve gunk better. Just make sure you get it nice and dry so you don't have persistant chamber fires when shooting.
-
- Private 2
- Posts: 28
- Joined: Fri Sep 07, 2007 7:02 pm
thanks i just cleaned my chamber out this weekend with soap and water and it was a PAIN!!!
- CannonCreator
- Specialist 3
- Posts: 314
- Joined: Sun Aug 12, 2007 12:59 pm
- Location: Moorpark, CA
- Contact:
Welsome to Spudfiles! just make sure that next time you post make sure its in the right secion of the forum, that way you will recieve more help. Thank you!
Spudding Is dangerous, I learned the hard way:
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
http://www.spudfiles.com/forums/my-eye- ... 15301.html
Guns. As They may Claim lives, they are lives. Our lives.
When Life gives you lemons, through them at somone.
Live, Breathe, Eat, Paintball
I've used alcohol to clean the gunk out of my combustion. Removes lots of gunk but I haven't found anything that will dissolve crap out of the chamber fan.
The first time I cleaned my cannon I removed a chunk of pear, some pebbles, lots of pear/potato/persimmon shavings, and alot of yellow gunk.
The first time I cleaned my cannon I removed a chunk of pear, some pebbles, lots of pear/potato/persimmon shavings, and alot of yellow gunk.
charburator cleaner?
Marvin the Martian: Where's the kaboom? There was supposed to be an earth-shattering kaboom!
Marvin the Martian: The Earth? Oh, the Earth will be gone in just a few seconds.
Marvin the Martian: The Earth? Oh, the Earth will be gone in just a few seconds.
PCGUY wrote:Congrats, your the first donating member I have had to ban.
soap + water, hot
toilet brush that I flatened out fits well in barrel too
the brush handle fits in side 1" PVC so 1 screw holdes it on pipe
yellow stuff is starch as near as I can figure. When chamber is gooie
my sparks ground out
toilet brush that I flatened out fits well in barrel too
the brush handle fits in side 1" PVC so 1 screw holdes it on pipe
yellow stuff is starch as near as I can figure. When chamber is gooie
my sparks ground out
Rubbing alcohol should do the trick and it wont take long for it to evaporate off either, or you can use carby cleaner as trae08 said for seriously baked on grime. Just remember to air it out after and try not to get too much fluid on the electrodes. Good luck mate.
spelling list:
Welcome
section
receive
Combustion Cannon Discussion
Post questions and info about combustion (flammable vapor) powered cannons here. This includes discussion about fuels, ratios, ignition systems, safety, and anything else relevant.
@ cannon creator: Do you not think this is a relevant question for the combustion cannon section? I think its a pretty relevant question, if a mod wishes it to be moved they will move it. I don't mean to have a go at you but you offered no help to potato launcher and misspelt three words, one of which was the first one. I know its easy to but there is a spell check.Welsome to Spudfiles! just make sure that next time you post make sure its in the right secion of the forum, that way you will recieve more help. Thank you!
spelling list:
Welcome
section
receive
Always out numbered....
never out gunned
never out gunned
My mini wasn't working well last weekend, so I just filled it with soap and water, and what a difference! Instead of a weak orangy spark, I get a bright blue/white one that has no trouble igniting it. Plus the inside of the chamber is all shiny now
I wonder how much deeper the ocean would be without sponges.
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before.
Add me on msn!!! insomniac-55@hotmail.com
- Pete Zaria
- Corporal 5
- Posts: 954
- Joined: Fri Mar 31, 2006 6:04 pm
- Location: Near Seattle, WA
@mtronic,
Just FYI, it was in the General section when CannonCreator posted, I moved it to Combustion between his post and your post. Typo's aside, he was right.
Peace,
Pete Zaria.
Just FYI, it was in the General section when CannonCreator posted, I moved it to Combustion between his post and your post. Typo's aside, he was right.
Peace,
Pete Zaria.
-
- Private 2
- Posts: 28
- Joined: Fri Sep 07, 2007 7:02 pm
thanks i cleaned it and know it is fine, can you buy flints for lantern sparkers or do you have to replace it