http://s207.photobucket.com/albums/bb28 ... ¤t=S emi-Auto.jpg
Sorry about the rough drawing, it was quick.
Basically in the first picture (upper one), the "exhaust valve" covers the large hole in the pipe.-Note, the pipe has a covering on the end facing the body of the gun-. When the blowgun releases the air from an air source, the "exhaust valve" moves foward exposing the large hole in the pipe for the air to rush in and propel the projectile. When the blowgun is released, the spring pushes the "exhaust valve" back into position 1, covering the pipe.
Any thoughts or suggestions?
Thanks
Recent thoughts-Semi-Auto-
i think this is what your trying to show
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
- jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Your album is set to private, change the settings or upload the pictures directly onto spudfiles.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Specialist 2
- Posts: 265
- Joined: Fri Nov 02, 2007 12:25 pm
Forum 101 continues.
Use the "Direct Link" photobucket gives you surrounded by image tags.
Like this
For results like this.
Use the "Direct Link" photobucket gives you surrounded by image tags.
Like this
Code: Select all
[img]http://i207.photobucket.com/albums/bb28/HoBWild/Semi-Auto.jpg[/img]