Will this work as an auto system?
the orange is a blowgun
the purple is the barrel
the grey is a adjustable hopup/bb holder
the bb are spring fed
the only problem i can see is that the bb's in the magazine wont come out when pressure is applied.
oh and i don't wand to build a vortex type because there seems to be no real good way to bring the rof down, or is there.
Will this work as an auto system?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
If the BBs are spring fed, it should work well, it's pretty much what Davidvaini did here.
The biggest issue I see is that unless you're using a ready made airsoft mag that's sealed airtight though, it won't be easy to make a high capacity magazine.
The biggest issue I see is that unless you're using a ready made airsoft mag that's sealed airtight though, it won't be easy to make a high capacity magazine.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Use a tubemag.it won't be easy to make a high capacity magazine.
You could also put a small air feed on the back of the tubemag to push the bb's.
Holland!
R/C hobbystores hebben t, maar daar is het duur. Je kan ook bij de bouwmarkt kijken. Anders kan ik nog wel iets voor je regelen, maar volgende week weet ik pas of daar ook BB's in passen.