2" piston cannon

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
haulinick
Private 4
Private 4
Posts: 62
Joined: Tue Jun 13, 2006 1:54 am

Wed Aug 09, 2006 1:01 am

Here's my new beast of a cannon. it uses a 3" chamber and a 2" barrell. I am planning on making more barrels for it. probably a tennis ball barrel too.

The barrel goes throught the 3" tee and ends in the piece of 3" pipe holding the adaptor to the tee. Its piston made out of hot glue and a piece of thick rubber i found at osh. It is actuated by a 1" modified orbits watermaster.

I know that the gauge isn't exactly safe since it is threaded into the pipe and not a coupler. I am in the process of fixing that.
Attachments
piston assembly
piston assembly
Back of gun. filler valve. gauge is visible on the right
Back of gun. filler valve. gauge is visible on the right
Back of gun and pilot valve.
Back of gun and pilot valve.
The whole gun.
The whole gun.
User avatar
mark.f
Sergeant Major 4
Sergeant Major 4
Eritrea
Posts: 3638
Joined: Sat May 06, 2006 11:18 am
Location: The Big Steezy
Has thanked: 58 times
Been thanked: 61 times
Contact:

Donating Members

Wed Aug 09, 2006 6:35 am

Neat! Looks like it works good.
User avatar
Velocity
Sergeant
Sergeant
Posts: 1039
Joined: Tue Feb 07, 2006 5:42 pm

Wed Aug 09, 2006 10:17 am

Very nice! I love the look of piston-valve cannons! Great job!
User avatar
spudkpi
Specialist
Specialist
Posts: 135
Joined: Tue Aug 01, 2006 8:52 pm

Wed Aug 09, 2006 10:49 am

Ahhh the satisfaction of knowing that you have created your own working valve is just grand. It's a clean setup and I like it. How well does the piston seal the barrel? I am currently in the process of making a 2'' piston cannon myself and plan on making interchangable (sp) barrels and chambers. Nice cannon though... any plans for a paint job?
haulinick
Private 4
Private 4
Posts: 62
Joined: Tue Jun 13, 2006 1:54 am

Wed Aug 09, 2006 11:22 am

Thanks alot guys. I am very proud that I made my own valve.
It was a pian in the ass to get the piston to seal. The hard part was finding the right seal. I used a rubber pipe cap, the kind that are made to be pipe clamped over a the end of an open pipe. I just fot the 3" one and cut the flat center out of it. I dont know about painting it yet. I'll probably get around to it eventually.
User avatar
Shrimphead
Corporal
Corporal
Posts: 509
Joined: Thu Nov 17, 2005 7:42 pm

Wed Aug 09, 2006 3:31 pm

Looks good! Put up some damage pics so we can see how it performs.
Controlled insanity = Genius
Life flies when you're being dumb.
User avatar
huse_spud
Specialist 2
Specialist 2
Posts: 269
Joined: Sat Apr 15, 2006 6:52 pm
Location: Center Junction, IA

Thu Aug 10, 2006 8:22 pm

cool beans man, i bet it bails the air out nicely.

and btw, ur guage is just fine, leave it. u could add a small street elbow so that the guage is actually visible though :lol:
User avatar
drac
Corporal 4
Corporal 4
United States of America
Posts: 899
Joined: Sun Apr 24, 2005 8:56 am
Location: Avon, NY
Been thanked: 2 times

Thu Aug 10, 2006 9:46 pm

Your pilot hose is too long, shorten it and you'll get much better performance.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Fri Sep 08, 2006 3:15 am

im going to add a pilot hose on my piston,does it decrease performance by much?
User avatar
Daemonseed
Private 2
Private 2
Posts: 34
Joined: Tue Mar 28, 2006 10:14 pm

Fri Dec 22, 2006 6:06 pm

only 1 thing you could have changed, the fill valve is going through a single layer of pvc, not 2, otherwise great gun
User avatar
Bluetooth
Corporal 4
Corporal 4
Posts: 863
Joined: Tue Jun 27, 2006 7:57 am

Fri Dec 22, 2006 6:24 pm

It says that in his post :x !! The second word of your avatar really makes sense.
Last edited by Bluetooth on Fri Dec 22, 2006 7:37 pm, edited 1 time in total.
User avatar
Daemonseed
Private 2
Private 2
Posts: 34
Joined: Tue Mar 28, 2006 10:14 pm

Fri Dec 22, 2006 7:35 pm

thats what drinking does to ya
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Fri Dec 22, 2006 9:23 pm

^ dude, stop kicking these up. Nobody cares anymore about the old ones.


now I'm gonna get spanked by pimp for telling you that...
Post Reply