Anyone know any good modifications or useful valves you can make these things into?
And do you think i could implement the system in the valves into the T piece in the spray gun?
Know any good mods to these valves? And opinion on mod.
-
Pneumaticology
- Private 2
- Posts: 27
- Joined: Thu Jul 21, 2011 1:47 am
- Attachments
-
- Spray gun
- t_spraygun5_125.jpg (19.3 KiB) Viewed 2861 times
-
- Valves
Well regarding the spraygun, what inclines you to modify a ~$150 device? Anyway, if you can access the internals, just addition of Vaseline will help, water seals leak ever so slightly when used with compressed air.
Otherwise I can't advise you much, those who aren't familiar with this rather popular spraygun need to see some internal pictures.
Otherwise I can't advise you much, those who aren't familiar with this rather popular spraygun need to see some internal pictures.
/sarcasm, /hyperbole
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
As suggested in a previous thread, you should be able to remove the stainless piece and dramatically shorten the valve.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Pneumaticology
- Private 2
- Posts: 27
- Joined: Thu Jul 21, 2011 1:47 am
yes, but the end piece of the valve has no threaded fitting, and would make attaching any sort of receiver and furthermore barrel a major pain.As suggested in a previous thread, you should be able to remove the stainless piece and dramatically shorten the valve.
The fact it is useless for what i want.what inclines you to modify a ~$150 device?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Pneumaticology wrote:yes, but the end piece of the valve has no threaded fitting, and would make attaching any sort of receiver and furthermore barrel a major pain.
- Attachments
-
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Pneumaticology
- Private 2
- Posts: 27
- Joined: Thu Jul 21, 2011 1:47 am
Oh my...
You win this round JSR
You win this round JSR
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
JSR wins EVERY round. 
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
JSR tries his best but is willing to concede defeat on the rare occasions he he gets it wrong ;P Also he refers to himself in the third person and is a cunt.Gun Freak wrote:JSR wins EVERY round.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
I thought I was wrong once, but I was wrong.
Back on topic. The two valves on the bottom are OTP valves for water heaters. OTP stands for Over Temperature Pressure. They are a combination pressure relief valve and thermostatic valve that lets out hot water before it becomes too hot to make high pressure steam. If this is removed and you have a stuck thermostat, you have the makings of a Mythbusters episode. On old water heaters, sometimes those valves will corrode closed, or may leak so people plug them. The result is not good.
[youtube][/youtube]
Back on topic. The two valves on the bottom are OTP valves for water heaters. OTP stands for Over Temperature Pressure. They are a combination pressure relief valve and thermostatic valve that lets out hot water before it becomes too hot to make high pressure steam. If this is removed and you have a stuck thermostat, you have the makings of a Mythbusters episode. On old water heaters, sometimes those valves will corrode closed, or may leak so people plug them. The result is not good.
[youtube][/youtube]