3/2 valve as main valve?

[bookyle]

Wait, another idea just hit me after reading this

http://www.zdspb.com/tech/misc/solenoids_design.html

more importantly this little section

I should also mention that any four-way solenoid can be effectively converted to a three-way, by simply blocking off one of the outputs (blocking the idle output makes it a normally-closed; blocking the firing output makes it a normally-open).

now I'm trying to understand how this works...

[POLAND_SPUD]

well I was about to suggest that...
the idea is simple - you block off one output and it almost becomes a 3 way valve - I say almost because it will still loose a tiny amount of air - precisely the volume of the inside of the valve leading to the blocked off port

it has one major advantage - you buy a 5 way valve and then you can either have:
A) a 5 way valve
B) a NO valve (if you block off one port)
C a NC valve (if you block the other port)

[bookyle]

I'll experiment with when I get it then. Now all I have to do is find a valve with 1/4 NTP threads

edit

Would 1/8" exhaust port be enough to fire a BB? Or do I have to get a valve with 1/4" exhaust?

[POLAND_SPUD]

Would 1/8" exhaust port be enough to fire a BB? Or do I have to get a valve with 1/4" exhaust?

it would be enough but 1/4" would give you better power